The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 7075 OVERALL, closed_length: 16.590 INCHES MINIMUM AND 16.670 INCHES MAXIMUM IN, extended_length: 37.630 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), special_features: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILIADELPHIPRODUCTION STANDARD NO. PO0341NRP.
This part is cataloged in the U.S. Government catalog under NSN 5340-01-128-4327, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
PO0341NRP
NSN:5340-01-128-4327 FSC:5340 — Hardware, Commercial CAGE:14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
width
0.500 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
material
ALUMINUM ALLOY 7075 OVERALL
closed_length
16.590 INCHES MINIMUM AND 16.670 INCHES MAXIMUM IN
extended_length
37.630 INCHES NOMINAL IN
mounting_method
THREADED HOLE(S)
special_features
ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILIADELPHIPRODUCTION STANDARD NO. PO0341NRP
surface_treatment
ANODIZE OVERALL
special_test_features
SPECIAL QUALITY CONTROL TESTING
side_for_which_designed
LEFT HAND OR RIGHT HAND
departure_from_cited_document
AS MODIFIED BY MATERIAL
criticality_code_justification
ZZZY
material_document_and_classification
QQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN
5340-01-128-4327
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED LENGTH: 37.630 INCHES NOMINAL IN
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
MOUNTING METHOD: THREADED HOLE(S)
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY MATERIAL
•
CLOSED LENGTH: 16.590 INCHES MINIMUM AND 16.670 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED LENGTH
37.630 INCHES NOMINAL IN
SPECIAL TEST FEATURES
SPECIAL QUALITY CONTROL TESTING
MOUNTING METHOD
THREADED HOLE(S)
CRITICALITY CODE JUSTIFICATION
ZZZY
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-200/11,T6 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DEPARTURE FROM CITED DOCUMENT
AS MODIFIED BY MATERIAL
CLOSED LENGTH
16.590 INCHES MINIMUM AND 16.670 INCHES MAXIMUM IN
SPECIAL FEATURES
ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILIADELPHIPRODUCTION STANDARD NO. PO0341NRP
SURFACE TREATMENT
ANODIZE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PO0341NRP?
PO0341NRP is a SLIDE,DRAWER,EXTENSION.
What parts can replace PO0341NRP?
There is 1 known substitute for PO0341NRP: 108349-1. Substitute compatibility should be verified for your specific system.
What is the NSN for PO0341NRP?
PO0341NRP is cataloged in the U.S. Government catalog under NSN 5340-01-128-4327. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.