PartsTable
Technical Data Sheet
Download PDF

PO013237984 — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PO013237984: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, construction: SOLID, overall_length: 10.780 INCHES NOMINAL IN, special_features: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO1346, style_designator: STRIP, attachment_method: ROUND HOLE.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-323-7984, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PO013237984
NSN: 5330-01-323-7984
FSC: 5330 — Packing and Gasket Materials
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
constructionSOLID
overall_length10.780 INCHES NOMINAL IN
special_featuresITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO1346
style_designatorSTRIP
attachment_methodROUND HOLE
cross-sectional_width0.250 INCHES NOMINAL IN
special_test_featuresSPECIAL QUALITY CONTROL TESTING
cross-sectional_height1.000 INCHES NOMINAL IN
attachment_hole_diameter0.810 INCHES NOMINAL IN
attachment_feature_quantity4
cross-sectional_shape_styleRECTANGULAR
NSN5330-01-323-7984
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PO013237984 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT HOLE DIAMETER: 0.810 INCHES NOMINAL IN
•
ATTACHMENT FEATURE QUANTITY: 4
•
CROSS-SECTIONAL HEIGHT: 1.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.250 INCHES NOMINAL IN
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6170,TYPE 2,GRADE A,SOFT MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
ATTACHMENT HOLE DIAMETER0.810 INCHES NOMINAL IN
ATTACHMENT FEATURE QUANTITY4
CROSS-SECTIONAL HEIGHT1.000 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.250 INCHES NOMINAL IN
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
CRITICALITY CODE JUSTIFICATIONZZZY
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6170,TYPE 2,GRADE A,SOFT MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH10.780 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SUBSTITUTES & CROSS-REFERENCES 3
127421-2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LL-HQ6-7608Reference document
Same NSN cross-reference
Reference document — Secondary reference
LO1346Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PO013237984?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PO013237984?
PO013237984 is a SEAL,NONMETALLIC STRIP.
What parts can replace PO013237984?
There are 3 known substitutes for PO013237984: 127421-2, LL-HQ6-7608, LO1346. Substitute compatibility should be verified for your specific system.
What is the NSN for PO013237984?
PO013237984 is cataloged in the U.S. Government catalog under NSN 5330-01-323-7984. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PO013237984

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.