PartsTable
Technical Data Sheet
PartsTable / O-RING / PO013154215
PO013154215 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, center_hole_diameter: 0.635 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN, cross-sectional_height: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-315-4215, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PO013154215
NSN: 5331-01-315-4215
FSC: 5331 — O-RING
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
center_hole_diameter0.635 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
cross-sectional_height0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
NSN5331-01-315-4215
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PO013154215 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.635 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.635 INCHES MINIMUM AND 0.653 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
102311Interchangeable
interchangeable cross-reference
interchangeable
10231Interchangeable
interchangeable cross-reference
interchangeable
5501-0003Interchangeable
interchangeable cross-reference
interchangeable
951-70114-00Interchangeable
interchangeable cross-reference
interchangeable
5577-4AInterchangeable
interchangeable cross-reference
interchangeable
LL-HQ6-4341Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PO013154215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PO013154215?
PO013154215 is a O-RING.
What parts can replace PO013154215?
There are 9 known substitutes for PO013154215: 102311, 10231, 5501-0003 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PO013154215?
PO013154215 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-315-4215. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PO013154215

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026