PartsTable
Technical Data Sheet
Download PDF

PO011519312 — RUBBER STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PO011519312: RUBBER STRIP.

The RUBBER STRIP is a the manufacturer industrial component. Key specifications include length: 21.562 INCHES NOMINAL IN, material: RUBBER CHLOROPRENE CLASS CR, special_features: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO011519312, surface_condition: SMOOTH BOTH SIDES, fabrication_method: CELLULAR, UNEXPLODED, cross-sectional_width: 0.125 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-151-9312, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PO011519312
NSN: 5330-01-151-9312
FSC: 5330 — Packing and Gasket Materials
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
length21.562 INCHES NOMINAL IN
materialRUBBER CHLOROPRENE CLASS CR
special_featuresITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO011519312
surface_conditionSMOOTH BOTH SIDES
fabrication_methodCELLULAR, UNEXPLODED
cross-sectional_width0.125 INCHES NOMINAL IN
cross-sectional_height0.625 INCHES NOMINAL IN
environmental_protectionOIL RESISTANT AND FIRE RESISTANT
cross-sectional_shape_styleRECTANGULAR
criticality_code_justificationZZZY
material_document_and_classificationMIL-R-6130, TYPE 2, GRADE A, COND SOFT MIL SPEC SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsREFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP
NSN5330-01-151-9312
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PO011519312 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 21.562 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.625 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.125 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6130, TYPE 2, GRADE A, COND SOFT MIL SPEC SINGLE MATERIAL RESPONSE
•
SURFACE CONDITION: SMOOTH BOTH SIDES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
TECHNICAL CHARACTERISTICS
LENGTH21.562 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.625 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.125 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6130, TYPE 2, GRADE A, COND SOFT MIL SPEC SINGLE MATERIAL RESPONSE
SURFACE CONDITIONSMOOTH BOTH SIDES
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SPECIAL FEATURESITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO011519312
ENVIRONMENTAL PROTECTIONOIL RESISTANT AND FIRE RESISTANT
MATERIALRUBBER CHLOROPRENE CLASS CR
SUBSTITUTES & CROSS-REFERENCES 2
116540-1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
P00058NRPReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy PO011519312?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PO011519312?
PO011519312 is a RUBBER STRIP.
What parts can replace PO011519312?
There are 2 known substitutes for PO011519312: 116540-1, P00058NRP. Substitute compatibility should be verified for your specific system.
What is the NSN for PO011519312?
PO011519312 is cataloged in the U.S. Government catalog under NSN 5330-01-151-9312. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PO011519312

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.