PartsTable
Technical Data Sheet
Download PDF

PO010442341 — SEAL,NONMETALLIC STRIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PO010442341: SEAL,NONMETALLIC STRIP.

The SEAL,NONMETALLIC STRIP is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, construction: SOLID, overall_length: 5.500 INCHES NOMINAL IN, special_features: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO1353, style_designator: STRIP, attachment_method: ROUND HOLE.

This part is cataloged in the U.S. Government catalog under NSN 5330-01-044-2341, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PO010442341
NSN: 5330-01-044-2341
FSC: 5330 — Packing and Gasket Materials
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
constructionSOLID
overall_length5.500 INCHES NOMINAL IN
special_featuresITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO1353
style_designatorSTRIP
attachment_methodROUND HOLE
fabrication_methodSOLID
cross-sectional_width0.031 INCHES NOMINAL IN
cross-sectional_height0.560 INCHES NOMINAL IN
attachment_hole_diameter0.180 INCHES NOMINAL IN
attachment_feature_quantity3
cross-sectional_shape_styleRECTANGULAR
NSN5330-01-044-2341
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PO010442341 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT HOLE DIAMETER: 0.180 INCHES NOMINAL IN
•
ATTACHMENT FEATURE QUANTITY: 3
•
CROSS-SECTIONAL HEIGHT: 0.560 INCHES NOMINAL IN
•
CROSS-SECTIONAL WIDTH: 0.031 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
STYLE DESIGNATOR: STRIP
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
ATTACHMENT HOLE DIAMETER0.180 INCHES NOMINAL IN
ATTACHMENT FEATURE QUANTITY3
CROSS-SECTIONAL HEIGHT0.560 INCHES NOMINAL IN
CROSS-SECTIONAL WIDTH0.031 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZY
STYLE DESIGNATORSTRIP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH5.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
ATTACHMENT FEATURE CENTER TO CENTER DISTANCE ALONG LENGTH2.125 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
2428B87-H01Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LO1353Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
P00201NRPReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PO010442341?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PO010442341?
PO010442341 is a SEAL,NONMETALLIC STRIP.
What parts can replace PO010442341?
There are 3 known substitutes for PO010442341: 2428B87-H01, LO1353, P00201NRP. Substitute compatibility should be verified for your specific system.
What is the NSN for PO010442341?
PO010442341 is cataloged in the U.S. Government catalog under NSN 5330-01-044-2341. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PO010442341

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.