PartsTable
Technical Data Sheet
Download PDF

PO0094NRP — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

PO0094NRP: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL, head_style: FLAT CHAMFER, head_height: 0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.550 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN, thread_length: 0.845 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-331-5796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PO0094NRP
NSN: 5305-01-331-5796
FSC: 5305 — Screws
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
head_styleFLAT CHAMFER
head_height0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.550 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
thread_length0.845 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
fastener_length0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
special_featuresITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIA PRODUCTION STANDARD NO. PO0094NRP
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.3125 INCHES MINIMUM AND 0.3160 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-01-331-5796
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: PO0094NRP · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.3125 INCHES MINIMUM AND 0.3160 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 TY2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
THREAD LENGTH: 0.845 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.3125 INCHES MINIMUM AND 0.3160 INCHES MAXIMUM IN
HEAD HEIGHT0.360 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
FASTENER LENGTH0.970 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 TY2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
THREAD LENGTH0.845 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT CHAMFER
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
1H0099LLHQ69985Reference document
Same NSN cross-reference
Reference document — Secondary reference
KRL83Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PO0094NRP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PO0094NRP?
PO0094NRP is a SCREW,CAP,SOCKET HEAD.
What parts can replace PO0094NRP?
There are 2 known substitutes for PO0094NRP: 1H0099LLHQ69985, KRL83. Substitute compatibility should be verified for your specific system.
What is the NSN for PO0094NRP?
PO0094NRP is cataloged in the U.S. Government catalog under NSN 5305-01-331-5796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PO0094NRP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.