PartsTable
Technical Data Sheet
Download PDF

PN1710 — NUT,PLAIN,WELDING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

PN1710: NUT,PLAIN,WELDING.

The NUT,PLAIN,WELDING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1008 AND STEEL COMP 1010 OVERALL, nut_length: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-922-3512, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PN1710
NSN: 5310-00-922-3512
FSC: 5310 — Nuts and Washers
CAGE: 76871 — OHIO NUT AND BOLT CO DIV OF FASTENER INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL COMP 1008 AND STEEL COMP 1010 OVERALL
nut_length0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
thread_seriesUNF
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
NSN5310-00-922-3512
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: PN1710 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT LENGTH: 0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT THICKNESS: 0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 32
•
MATERIAL: STEEL COMP 1008 AND STEEL COMP 1010 OVERALL
TECHNICAL CHARACTERISTICS
NUT LENGTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT THICKNESS0.091 INCHES MINIMUM AND 0.097 INCHES MAXIMUM IN
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALSTEEL COMP 1008 AND STEEL COMP 1010 OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
A2175Reference document
Same NSN cross-reference
Reference document — Secondary reference
15753936-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PN1710?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PN1710?
PN1710 is a NUT,PLAIN,WELDING.
What parts can replace PN1710?
There are 2 known substitutes for PN1710: A2175, 15753936-001. Substitute compatibility should be verified for your specific system.
What is the NSN for PN1710?
PN1710 is cataloged in the U.S. Government catalog under NSN 5310-00-922-3512. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PN1710

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.