PMD7900-6-A-2 — SCREW ASSEMBLY,PANEL

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

PMD7900-6-A-2: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4037 FASTENER, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.317 INCHES NOMINAL IN, thread_length: 0.098 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, fastener_length: 0.385 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-366-2784, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PMD7900-6-A-2

NSN: 5305-01-366-2784
FSC: 5305 — Screws
CAGE: 97928 — HUCK INTL INC (USA)

SPECIFICATIONS

material	STEEL COMP 4037 FASTENER
head_style	FLAT COUNTERSUNK
thread_class	2A A
head_diameter	0.317 INCHES NOMINAL IN
thread_length	0.098 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
fastener_length	0.385 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
hardness_rating	34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM FASTENER
thread_direction	RIGHT-HAND
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatment	PASSIVATE PRIMARY WASHER
internal_drive_style	CROSS RECESS TYPE 1
nominal_thread_diameter	0.138 INCHES IN
NSN	5305-01-366-2784

COMPONENT DIAGRAM

KEY FEATURES

•

FASTENER LENGTH: 0.385 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE PRIMARY WASHER

•

MATERIAL ACCOMMODATED THICKNESS: 0.109 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.098 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN

•

HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM FASTENER

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER

TECHNICAL CHARACTERISTICS

FASTENER LENGTH	0.385 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
MATERIAL ACCOMMODATED THICKNESS	0.109 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
THREAD LENGTH	0.098 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
HARDNESS RATING	34.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-8695 MIL SPEC SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE STAND-OFF

OTHER ITEMS IN FSC 5305 — Screws

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy PMD7900-6-A-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PMD7900-6-A-2?

PMD7900-6-A-2 is a SCREW ASSEMBLY,PANEL.

What is the NSN for PMD7900-6-A-2?

PMD7900-6-A-2 is cataloged in the U.S. Government catalog under NSN 5305-01-366-2784. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PMD7900-6-A-2 — SCREW ASSEMBLY,PANEL

Request a Quote — PMD7900-6-A-2