PartsTable / O-RING / PM-2009-CM
PM-2009-CM
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 4.096 INCHES MINIMUM AND 4.162 INCHES MAXIMUM IN, center_hole_diameter: 3.962 INCHES MINIMUM AND 4.016 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-015-5747, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
PM-2009-CM
NSN: 5331-01-015-5747 FSC: 5331 — O-RINGCAGE: 61208 — TWIN DISC, INCORPORATED DBA TWIN DISC MID-ATLANTIC (USA)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR temp_rating -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF hardness_rating 70.0 SHORE DUROMETER A NOMINAL outside_diameter 4.096 INCHES MINIMUM AND 4.162 INCHES MAXIMUM IN center_hole_diameter 3.962 INCHES MINIMUM AND 4.016 INCHES MAXIMUM IN elongation_percentage 331 MAXIMUM cross-sectional_height 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN NSN 5331-01-015-5747
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: PM-2009-CM
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• ELONGATION PERCENTAGE: 331 MAXIMUM
• CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 4.096 INCHES MINIMUM AND 4.162 INCHES MAXIMUM IN
• TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
• CENTER HOLE DIAMETER: 3.962 INCHES MINIMUM AND 4.016 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR ELONGATION PERCENTAGE 331 MAXIMUM CROSS-SECTIONAL HEIGHT 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN OUTSIDE DIAMETER 4.096 INCHES MINIMUM AND 4.162 INCHES MAXIMUM IN TEMP RATING -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF CENTER HOLE DIAMETER 3.962 INCHES MINIMUM AND 4.016 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
11045 Interchangeable interchangeable cross-reference
interchangeable
A11045 Interchangeable interchangeable cross-reference
interchangeable
22306 Interchangeable interchangeable cross-reference
interchangeable
T-45-120 Interchangeable interchangeable cross-reference
interchangeable
GGG-S-665 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy PM-2009-CM?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PM-2009-CM?
PM-2009-CM is a O-RING.
What parts can replace PM-2009-CM?
There are 28 known substitutes for PM-2009-CM: 11045, A11045, 22306 and 25 more. Substitute compatibility should be verified for your specific system.
Is PM-2009-CM still available?
PM-2009-CM is currently cancelled.
Request a Quote — PM-2009-CM