PLT1012-8-11: RIVET,BLIND.
The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 NUT, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.657 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN, lubrication: GREASE FILM OR DRY FILM OR WAX OR CETYL ALCOHOL, shank_style: SELF-PLUGGING MECHANICALLY LOCKED STEM, shank_diameter: 0.289 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5320-01-218-3263, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 NUT |
| head_style | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| grip_length | 0.657 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN |
| lubrication | GREASE FILM OR DRY FILM OR WAX OR CETYL ALCOHOL |
| shank_style | SELF-PLUGGING MECHANICALLY LOCKED STEM |
| shank_diameter | 0.289 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN |
| hardness_rating | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT |
| expansion_device | SERRATED STEM-TYPE W |
| countersink_angle | 100.0 DEGREES NOMINAL |
| surface_treatment | PASSIVATE OR CADMIUM SLEEVE |
| head_major_diameter | 0.507 INCHES MAXIMUM IN |
| minimum_tensile_strength | 18000 POUNDS PER SQUARE INCH LBS |
| NSN | 5320-01-218-3263 |
| SHANK DIAMETER | 0.289 INCHES MINIMUM AND 0.291 INCHES MAXIMUM IN |
| LUBRICATION | GREASE FILM OR DRY FILM OR WAX OR CETYL ALCOHOL |
| EXPANSION DEVICE | SERRATED STEM-TYPE W |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY 1 CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM NUT |
| HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM BOLT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT |
No substitute or cross-reference records for this part.