PartsTable
Technical Data Sheet

PLR 1-3/8 — CAM FOLLOWER,NEEDLE BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

PLR 1-3/8: CAM FOLLOWER,NEEDLE BEARING.

The CAM FOLLOWER,NEEDLE BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, stud_length: 0.4250 INCHES NOMINAL IN, stud_diameter: 0.5000 INCHES NOMINAL IN, thread_length: 0.8250 INCHES NOMINAL IN, overall_length: 2.1250 INCHES NOMINAL IN, outer_ring_width: 0.8440 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-516-2851, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PLR 1-3/8
NSN: 3110-01-516-2851
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 45092 — JASON INCORPORATED DBA OSBORN INTERNATIONAL A UNIT OF JASON (USA)
SPECIFICATIONS
materialSTEEL OVERALL
stud_length0.4250 INCHES NOMINAL IN
stud_diameter0.5000 INCHES NOMINAL IN
thread_length0.8250 INCHES NOMINAL IN
overall_length2.1250 INCHES NOMINAL IN
outer_ring_width0.8440 INCHES NOMINAL IN
special_features1/2-20 FINE THREAD
style_designatorCAM FOLLOWER
end_item_identificationVDS NOSE SUPP
overall_outside_diameter1.3750 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyLOAD RUNNERS, PLAIN STUD STYLE
NSN3110-01-516-2851
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: PLR 1-3/8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTER RING WIDTH: 0.8440 INCHES NOMINAL IN
•
THREAD LENGTH: 0.8250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CAM FOLLOWER
•
OVERALL OUTSIDE DIAMETER: 1.3750 INCHES NOMINAL IN
•
STUD LENGTH: 0.4250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OUTER RING WIDTH0.8440 INCHES NOMINAL IN
THREAD LENGTH0.8250 INCHES NOMINAL IN
STYLE DESIGNATORCAM FOLLOWER
OVERALL LENGTH2.1250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.3750 INCHES NOMINAL IN
STUD LENGTH0.4250 INCHES NOMINAL IN
SPECIAL FEATURES1/2-20 FINE THREAD
PART NAME ASSIGNED BY CONTROLLING AGENCYLOAD RUNNERS, PLAIN STUD STYLE
END ITEM IDENTIFICATIONVDS NOSE SUPP
MATERIALSTEEL OVERALL
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — mutilation
Ready to buy PLR 1-3/8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PLR 1-3/8?
PLR 1-3/8 is a CAM FOLLOWER,NEEDLE BEARING.
What is the NSN for PLR 1-3/8?
PLR 1-3/8 is cataloged in the U.S. Government catalog under NSN 3110-01-516-2851. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PLR 1-3/8