PartsTable
Technical Data Sheet
Download PDF

PLMA000022 FIND 20 — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PLMA000022 FIND 20: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 2.9700 INCHES MINIMUM AND 3.0300 INCHES MAXIMUM IN, height: 0.4700 INCHES MINIMUM AND 0.5300 INCHES MAXIMUM IN, material: ALUMINUM OVERALL, load_capacity: 150.0 POUNDS NOMINAL LBS, mounting_method: UNTHREADED HOLE(S), side_for_which_designed: RIGHT HAND. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-443-2159, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PLMA000022 FIND 20
NSN: 5340-01-443-2159
FSC: 5340 — Hardware, Commercial
CAGE: 55354 — UNIVERSITY OF TEXAS AT AUSTIN DIV APPLIED RESEARCH LABORATORIES (USA)
SPECIFICATIONS
width2.9700 INCHES MINIMUM AND 3.0300 INCHES MAXIMUM IN
height0.4700 INCHES MINIMUM AND 0.5300 INCHES MAXIMUM IN
materialALUMINUM OVERALL
load_capacity150.0 POUNDS NOMINAL LBS
mounting_methodUNTHREADED HOLE(S)
side_for_which_designedRIGHT HAND
NSN5340-01-443-2159
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PLMA000022 FIND 20 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
HEIGHT: 0.4700 INCHES MINIMUM AND 0.5300 INCHES MAXIMUM IN
•
WIDTH: 2.9700 INCHES MINIMUM AND 3.0300 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM OVERALL
•
LOAD CAPACITY: 150.0 POUNDS NOMINAL LBS
•
SIDE FOR WHICH DESIGNED: RIGHT HAND
TECHNICAL CHARACTERISTICS
MOUNTING METHODUNTHREADED HOLE(S)
HEIGHT0.4700 INCHES MINIMUM AND 0.5300 INCHES MAXIMUM IN
WIDTH2.9700 INCHES MINIMUM AND 3.0300 INCHES MAXIMUM IN
MATERIALALUMINUM OVERALL
LOAD CAPACITY150.0 POUNDS NOMINAL LBS
SIDE FOR WHICH DESIGNEDRIGHT HAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PLMA000022 FIND 20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PLMA000022 FIND 20?
PLMA000022 FIND 20 is a SLIDE,DRAWER,EXTENSION.
What is the NSN for PLMA000022 FIND 20?
PLMA000022 FIND 20 is cataloged in the U.S. Government catalog under NSN 5340-01-443-2159. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PLMA000022 FIND 20