PartsTable
Technical Data Sheet
Download PDF

PLGA5315020A — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PLGA5315020A: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.513 INCHES MINIMUM AND 0.527 INCHES MAXIMUM IN, material: STEEL, outside_diameter: 0.5303 INCHES MINIMUM AND 0.5312 INCHES MAXIMUM IN, material_document_and_classification: AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-311-9439, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PLGA5315020A
NSN: 5340-01-311-9439
FSC: 5340 — Hardware, Commercial
CAGE: 92555 — THE LEE CO DBA THE LEE CO (USA)
SPECIFICATIONS
height0.513 INCHES MINIMUM AND 0.527 INCHES MAXIMUM IN
materialSTEEL
outside_diameter0.5303 INCHES MINIMUM AND 0.5312 INCHES MAXIMUM IN
material_document_and_classificationAMS 5610 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-311-9439
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PLGA5315020A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.5303 INCHES MINIMUM AND 0.5312 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.513 INCHES MINIMUM AND 0.527 INCHES MAXIMUM IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER0.5303 INCHES MINIMUM AND 0.5312 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5610 ASSN STD SINGLE MATERIAL RESPONSE
HEIGHT0.513 INCHES MINIMUM AND 0.527 INCHES MAXIMUM IN
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
PLGA5315020Reference document
Same NSN cross-reference
Reference document — Secondary reference
AS3127-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PLGA5315020A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PLGA5315020A?
PLGA5315020A is a PLUG,EXPANSION.
What parts can replace PLGA5315020A?
There are 2 known substitutes for PLGA5315020A: PLGA5315020, AS3127-11. Substitute compatibility should be verified for your specific system.
What is the NSN for PLGA5315020A?
PLGA5315020A is cataloged in the U.S. Government catalog under NSN 5340-01-311-9439. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PLGA5315020A