PartsTable
Technical Data Sheet
Download PDF

PLGA4685020 — PLUG,EXPANSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PLGA4685020: PLUG,EXPANSION.

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.383 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN, material: STEEL, outside_diameter: 0.4678 INCHES MINIMUM AND 0.4687 INCHES MAXIMUM IN, material_document_and_classification: AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-311-9438, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PLGA4685020
NSN: 5340-01-311-9438
FSC: 5340 — Hardware, Commercial
CAGE: 92555 — THE LEE CO DBA THE LEE CO (USA)
SPECIFICATIONS
height0.383 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
materialSTEEL
outside_diameter0.4678 INCHES MINIMUM AND 0.4687 INCHES MAXIMUM IN
material_document_and_classificationAMS 5610 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-01-311-9438
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PLGA4685020 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.4678 INCHES MINIMUM AND 0.4687 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5610 ASSN STD SINGLE MATERIAL RESPONSE
•
HEIGHT: 0.383 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER0.4678 INCHES MINIMUM AND 0.4687 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5610 ASSN STD SINGLE MATERIAL RESPONSE
HEIGHT0.383 INCHES MINIMUM AND 0.397 INCHES MAXIMUM IN
MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 2
AS3127-10Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
SAE-AS3127Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PLGA4685020?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PLGA4685020?
PLGA4685020 is a PLUG,EXPANSION.
What parts can replace PLGA4685020?
There are 2 known substitutes for PLGA4685020: AS3127-10, SAE-AS3127. Substitute compatibility should be verified for your specific system.
What is the NSN for PLGA4685020?
PLGA4685020 is cataloged in the U.S. Government catalog under NSN 5340-01-311-9438. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PLGA4685020