PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PLGA1561010
PLGA1561010 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,EXPANSION is a the manufacturer industrial component. Key specifications include height: 0.238 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2024, outside_diameter: 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN, style_designator: CUP, surface_treatment: ANODIZE, material_thickness: 0.021 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-955-6226, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PLGA1561010
NSN: 5340-00-955-6226
FSC: 5340
CAGE: F6137 — SAFRAN LANDING SYSTEMS (FRA)
SPECIFICATIONS
height0.238 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2024
outside_diameter0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
style_designatorCUP
surface_treatmentANODIZE
material_thickness0.021 INCHES NOMINAL IN
end_item_identificationAIRCRAFT, AIRLIFTER C-17A; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT, B-1B; AIRCRAFT, EAGLE F-15 A
material_document_and_classificationQQ-A-225/6, ALLOY 2024, T4 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-00-955-6226
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PLGA1561010 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE
•
HEIGHT: 0.238 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-268, COND 5S FED SPEC SINGLE MATERIAL RESPONSE
•
MATERIAL: ALUMINUM ALLOY
•
STYLE DESIGNATOR: CUP
•
MATERIAL THICKNESS: 0.021 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE
HEIGHT0.238 INCHES MINIMUM AND 0.252 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.155 INCHES MINIMUM AND 0.156 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-268, COND 5S FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY
STYLE DESIGNATORCUP
MATERIAL THICKNESS0.021 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
572-523-9101Upgraded Successor
successor cross-reference
successor
110183A1Upgraded Successor
successor cross-reference
successor
10112748Upgraded Successor
successor cross-reference
successor
22230-7Interchangeable
interchangeable cross-reference
interchangeable
MILR5757Interchangeable
interchangeable cross-reference
interchangeable
SKHX657Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PLGA1561010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PLGA1561010?
PLGA1561010 is a PLUG,EXPANSION.
What parts can replace PLGA1561010?
There are 26 known substitutes for PLGA1561010: 572-523-9101, 110183A1, 10112748 and 23 more. Substitute compatibility should be verified for your specific system.
Is PLGA1561010 still available?
PLGA1561010 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PLGA1561010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026