PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PLG36-1PC2
PLG36-1PC2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, inner_groove_depth: 0.125 INCHES NOMINAL IN, inner_groove_width: 0.098 INCHES NOMINAL IN, peripheral_diameter: 6.670 INCHES NOMINAL IN, center_hole_diameter: 6.296 INCHES NOMINAL IN, cross-sectional_height: 0.203 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-587-6049, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PLG36-1PC2
NSN: 5330-00-587-6049
FSC: 5330
CAGE: 56521 — REYNOLDS EQUIPMENT CO (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
inner_groove_depth0.125 INCHES NOMINAL IN
inner_groove_width0.098 INCHES NOMINAL IN
peripheral_diameter6.670 INCHES NOMINAL IN
center_hole_diameter6.296 INCHES NOMINAL IN
cross-sectional_height0.203 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5330-00-587-6049
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PLG36-1PC2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 6.296 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SPECIAL
•
PERIPHERAL DIAMETER: 6.670 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.203 INCHES NOMINAL IN
•
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
•
INNER GROOVE WIDTH: 0.098 INCHES NOMINAL IN
•
INNER GROOVE DEPTH: 0.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER6.296 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESPECIAL
PERIPHERAL DIAMETER6.670 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.203 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
INNER GROOVE WIDTH0.098 INCHES NOMINAL IN
INNER GROOVE DEPTH0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
PC68290-4Interchangeable
interchangeable cross-reference
interchangeable
3300P1-502Interchangeable
interchangeable cross-reference
interchangeable
MS51984-2Interchangeable
interchangeable cross-reference
interchangeable
105-114Interchangeable
interchangeable cross-reference
interchangeable
SCB98519Interchangeable
interchangeable cross-reference
interchangeable
0029359005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PLG36-1PC2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PLG36-1PC2?
PLG36-1PC2 is a PACKING,PREFORMED.
What parts can replace PLG36-1PC2?
There are 11 known substitutes for PLG36-1PC2: PC68290-4, 3300P1-502, MS51984-2 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PLG36-1PC2?
PLG36-1PC2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-587-6049. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PLG36-1PC2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026