PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PLC-11401-9
PLC-11401-9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC ALLYL OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 1.377 INCHES NOMINAL IN, center_hole_diameter: 1.141 INCHES NOMINAL IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, cross-sectional_shape_style: O-RING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-321-9266, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PLC-11401-9
NSN: 5330-00-321-9266
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPLASTIC ALLYL OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter1.377 INCHES NOMINAL IN
center_hole_diameter1.141 INCHES NOMINAL IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleO-RING
material_document_and_classificationMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-321-9266
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PLC-11401-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL RETAINER
•
CENTER HOLE DIAMETER: 1.141 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL RETAINER
CENTER HOLE DIAMETER1.141 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
105CInterchangeable
interchangeable cross-reference
interchangeable
MS-28774-216Interchangeable
interchangeable cross-reference
interchangeable
10119512Interchangeable
interchangeable cross-reference
interchangeable
304Interchangeable
interchangeable cross-reference
interchangeable
2633-745-02PC9Interchangeable
interchangeable cross-reference
interchangeable
ZZ-R-765Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PLC-11401-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PLC-11401-9?
PLC-11401-9 is a RETAINER,PACKING.
What parts can replace PLC-11401-9?
There are 20 known substitutes for PLC-11401-9: 105C, MS-28774-216, 10119512 and 17 more. Substitute compatibility should be verified for your specific system.
Is PLC-11401-9 still available?
PLC-11401-9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PLC-11401-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026