PL999D0556PC15 — SLEEVE,SHAFT,PUMP

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

PL999D0556PC15: SLEEVE,SHAFT,PUMP.

The SLEEVE,SHAFT,PUMP is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY OVERALL, corner_shape: SQUARE ALL CORNERS, flange_width: 2.7660 INCHES NOMINAL IN, overall_length: 11.4370 INCHES NOMINAL IN, style_designator: HALF SLEEVE, EXTERNAL FLANGE ONE END, body_inside_diameter: 3.6250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 4320-01-062-3428, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PL999D0556PC15

NSN: 4320-01-062-3428
FSC: 4320 — Power and Hand Pumps
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)

SPECIFICATIONS

material	NICKEL ALLOY OVERALL
corner_shape	SQUARE ALL CORNERS
flange_width	2.7660 INCHES NOMINAL IN
overall_length	11.4370 INCHES NOMINAL IN
style_designator	HALF SLEEVE, EXTERNAL FLANGE ONE END
body_inside_diameter	3.6250 INCHES NOMINAL IN
body_outside_diameter	4.0000 INCHES NOMINAL IN
flange_outside_diameter	5.0000 INCHES NOMINAL IN
NSN	4320-01-062-3428

COMPONENT DIAGRAM

KEY FEATURES

•

CORNER SHAPE: SQUARE ALL CORNERS

•

FLANGE OUTSIDE DIAMETER: 5.0000 INCHES NOMINAL IN

•

BODY OUTSIDE DIAMETER: 4.0000 INCHES NOMINAL IN

•

STYLE DESIGNATOR: HALF SLEEVE, EXTERNAL FLANGE ONE END

•

BODY INSIDE DIAMETER: 3.6250 INCHES NOMINAL IN

•

FLANGE WIDTH: 2.7660 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

CORNER SHAPE	SQUARE ALL CORNERS
FLANGE OUTSIDE DIAMETER	5.0000 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER	4.0000 INCHES NOMINAL IN
STYLE DESIGNATOR	HALF SLEEVE, EXTERNAL FLANGE ONE END
OVERALL LENGTH	11.4370 INCHES NOMINAL IN
BODY INSIDE DIAMETER	3.6250 INCHES NOMINAL IN
SPECIAL FEATURES	FLANGED END THD INTERNAL,3 3/4.-12UN,LH THD; W/THREE THD HOLES,1/2 IN.-13UNC ON OUTER PERIPHERY OF FLANGE,SPACED 120 DEG APART LOCATED 2.250 IN. FROM FLANGE END TO HOLE CENTR; FURNISHED W/THREE LOCK SCREWS IN
FLANGE WIDTH	2.7660 INCHES NOMINAL IN
MATERIAL	NICKEL ALLOY OVERALL

SUBSTITUTES & CROSS-REFERENCES 5

659C0588-APSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

65900163J028AReference document

Same NSN cross-reference

Reference document — Secondary reference

SPI-659C0588Reference document

Same NSN cross-reference

Reference document — Secondary reference

KMC-659C0588Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

999D0556Reference document

Same NSN cross-reference

Reference document — Drawing number reference only

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy PL999D0556PC15?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PL999D0556PC15?

PL999D0556PC15 is a SLEEVE,SHAFT,PUMP.

What parts can replace PL999D0556PC15?

There are 5 known substitutes for PL999D0556PC15: 659C0588-AP, 65900163J028A, SPI-659C0588 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for PL999D0556PC15?

PL999D0556PC15 is cataloged in the U.S. Government catalog under NSN 4320-01-062-3428. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PL999D0556PC15 — SLEEVE,SHAFT,PUMP

Request a Quote — PL999D0556PC15