PartsTable
Technical Data Sheet
Download PDF

PL999D0504PC35 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

PL999D0504PC35: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, first_end_style: CHAMFERED, second_end_style: SQUARE, pin_overall_length: 1.377 INCHES NOMINAL IN, pin_overall_diameter: 0.4400 INCHES NOMINAL IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-047-9944, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL999D0504PC35
NSN: 5315-01-047-9944
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 63857 — CIRCOR NAVAL SOLUTIONS LLC DBA WARREN PUMPS (USA)
SPECIFICATIONS
materialPLASTIC OVERALL
first_end_styleCHAMFERED
second_end_styleSQUARE
pin_overall_length1.377 INCHES NOMINAL IN
pin_overall_diameter0.4400 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.125 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-01-047-9944
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: PL999D0504PC35 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.125 INCHES NOMINAL IN
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.4400 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 1.377 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
SECOND END STYLE: SQUARE
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.125 INCHES NOMINAL IN
FIRST END STYLECHAMFERED
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.4400 INCHES NOMINAL IN
PIN OVERALL LENGTH1.377 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
SECOND END STYLESQUARE
MATERIALPLASTIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
N170Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PL999D0504PC35?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL999D0504PC35?
PL999D0504PC35 is a PIN,STRAIGHT,HEADLESS.
What parts can replace PL999D0504PC35?
There is 1 known substitute for PL999D0504PC35: N170. Substitute compatibility should be verified for your specific system.
What is the NSN for PL999D0504PC35?
PL999D0504PC35 is cataloged in the U.S. Government catalog under NSN 5315-01-047-9944. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL999D0504PC35

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.