PartsTable
Technical Data Sheet
Download PDF

PL702552 ITEM 13 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PL702552 ITEM 13: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-STYRENE CLASS SBR OVERALL, hole_diameter: 0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 9.250 INCHES NOMINAL IN, aperture_width: 7.250 INCHES NOMINAL IN, overall_length: 20.380 INCHES NOMINAL IN, aperture_length: 18.380 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-084-6026, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL702552 ITEM 13
NSN: 5330-01-084-6026
FSC: 5330 — Packing and Gasket Materials
CAGE: 58475 — L-3 COMMUNICATIONS WESTWOOD CORPORATION DBA NMP DIVISION DIV L3 WESTWOOD CORPORATION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-STYRENE CLASS SBR OVERALL
hole_diameter0.312 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width9.250 INCHES NOMINAL IN
aperture_width7.250 INCHES NOMINAL IN
overall_length20.380 INCHES NOMINAL IN
aperture_length18.380 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
bolt_hole_quantity12
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.500 INCHES NOMINAL IN
NSN5330-01-084-6026
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PL702552 ITEM 13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE WIDTH: 7.250 INCHES NOMINAL IN
•
APERTURE LENGTH: 18.380 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-900 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH20.380 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH9.250 INCHES NOMINAL IN
APERTURE WIDTH7.250 INCHES NOMINAL IN
APERTURE LENGTH18.380 INCHES NOMINAL IN
BOLT HOLE QUANTITY12
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH5.000 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 1
702588-3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PL702552 ITEM 13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL702552 ITEM 13?
PL702552 ITEM 13 is a GASKET.
What parts can replace PL702552 ITEM 13?
There is 1 known substitute for PL702552 ITEM 13: 702588-3. Substitute compatibility should be verified for your specific system.
What is the NSN for PL702552 ITEM 13?
PL702552 ITEM 13 is cataloged in the U.S. Government catalog under NSN 5330-01-084-6026. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL702552 ITEM 13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.