PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PL5060CCLYD-3 ITEM 15
PL5060CCLYD-3 ITEM 15 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: NICKEL ALLOY R-405 OVERALL, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND, nominal_thread_size: 0.875 INCHES IN, bearing_surface_type: CHAMFERED OR WASHER FACED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-422-5949, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL5060CCLYD-3 ITEM 15
NSN: 5310-01-422-5949
FSC: 5310
CAGE: 83130 — AIR & LIQUID SYSTEMS CORPORATION DBA BUFFALO PUMPS (USA)
SPECIFICATIONS
materialNICKEL ALLOY R-405 OVERALL
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
nominal_thread_size0.875 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch9
material_document_and_classificationASTM B164 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-01-422-5949
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: PL5060CCLYD-3 ITEM 15 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SURFACE TYPE: CHAMFERED OR WASHER FACED
•
NOMINAL THREAD SIZE: 0.875 INCHES IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 9
•
MATERIAL: NICKEL ALLOY R-405 OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2B
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B164 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
NOMINAL THREAD SIZE0.875 INCHES IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH9
MATERIALNICKEL ALLOY R-405 OVERALL
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2B
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B164 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
6151-1Interchangeable
interchangeable cross-reference
interchangeable
150079-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PL5060CCLYD-3 ITEM 15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL5060CCLYD-3 ITEM 15?
PL5060CCLYD-3 ITEM 15 is a NUT,PLAIN,HEXAGON.
What parts can replace PL5060CCLYD-3 ITEM 15?
There are 2 known substitutes for PL5060CCLYD-3 ITEM 15: 6151-1, 150079-01. Substitute compatibility should be verified for your specific system.
What is the NSN for PL5060CCLYD-3 ITEM 15?
PL5060CCLYD-3 ITEM 15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-422-5949. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL5060CCLYD-3 ITEM 15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026