PartsTable
Technical Data Sheet
Download PDF

PL433D0100 ITEM 8 — BRACKET,MOUNTING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PL433D0100 ITEM 8: BRACKET,MOUNTING.

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include mounting_hole_diameter: 0.190 INCHES NOMINAL IN, end_item_identification: CONTROL UNIT; W/S: VIRGINIA CLASS SUBMARINE SSN-774, part_name_assigned_by_controlling_agency: BRACKET ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-512-6113, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL433D0100 ITEM 8
NSN: 5340-01-512-6113
FSC: 5340 — Hardware, Commercial
CAGE: 51435 — EMS DEVELOPMENT CORPORATION (USA)
SPECIFICATIONS
mounting_hole_diameter0.190 INCHES NOMINAL IN
mounting_hole_quantity1
end_item_identificationCONTROL UNIT; W/S: VIRGINIA CLASS SUBMARINE SSN-774
part_name_assigned_by_controlling_agencyBRACKET ASSEMBLY
NSN5340-01-512-6113
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PL433D0100 ITEM 8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 1
•
MOUNTING HOLE DIAMETER: 0.190 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY1
MOUNTING HOLE DIAMETER0.190 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET ASSEMBLY
END ITEM IDENTIFICATIONCONTROL UNIT; W/S: VIRGINIA CLASS SUBMARINE SSN-774
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
433D1035-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PL433D0100 ITEM 8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL433D0100 ITEM 8?
PL433D0100 ITEM 8 is a BRACKET,MOUNTING.
What parts can replace PL433D0100 ITEM 8?
There is 1 known substitute for PL433D0100 ITEM 8: 433D1035-1. Substitute compatibility should be verified for your specific system.
What is the NSN for PL433D0100 ITEM 8?
PL433D0100 ITEM 8 is cataloged in the U.S. Government catalog under NSN 5340-01-512-6113. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL433D0100 ITEM 8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.