PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PL2584PC8
PL2584PC8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL RETAINER, peripheral_diameter: 1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN, center_hole_diameter: 1.141 INCHES NOMINAL IN, cross-sectional_height: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-321-9266, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL2584PC8
NSN: 5330-00-321-9266
FSC: 5330
CAGE: 99565 — ADMIRAL VALVE LLC DBA CPV MANUFACTURING (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL RETAINER
peripheral_diameter1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN
center_hole_diameter1.141 INCHES NOMINAL IN
cross-sectional_height0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-321-9266
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PL2584PC8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL RETAINER
•
CENTER HOLE DIAMETER: 1.141 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.045 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL RETAINER
CENTER HOLE DIAMETER1.141 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
105CInterchangeable
interchangeable cross-reference
interchangeable
MS-28774-216Interchangeable
interchangeable cross-reference
interchangeable
10119512Interchangeable
interchangeable cross-reference
interchangeable
304Interchangeable
interchangeable cross-reference
interchangeable
2633-745-02PC9Interchangeable
interchangeable cross-reference
interchangeable
ZZ-R-765Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PL2584PC8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL2584PC8?
PL2584PC8 is a RETAINER,PACKING.
What parts can replace PL2584PC8?
There are 19 known substitutes for PL2584PC8: 105C, MS-28774-216, 10119512 and 16 more. Substitute compatibility should be verified for your specific system.
Is PL2584PC8 still available?
PL2584PC8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL2584PC8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026