PartsTable
Technical Data Sheet
Download PDF

PL2122700-4 — PIN,GROOVED,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

PL2122700-4: PIN,GROOVED,HEADLESS.

The PIN,GROOVED,HEADLESS is a the manufacturer industrial component. Key specifications include diameter: 0.1876 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM IN, material: STEEL COMP 4130H OVERALL, overall_length: 0.875 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER, undercut_width: 0.042 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN, first_end_style: CHAMFERED W/THRU HOLE. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-923-5409, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL2122700-4
NSN: 5315-00-923-5409
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
diameter0.1876 INCHES MINIMUM AND 0.1878 INCHES MAXIMUM IN
materialSTEEL COMP 4130H OVERALL
overall_length0.875 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES OUTSIDE DIAMETER
undercut_width0.042 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
first_end_styleCHAMFERED W/THRU HOLE
hardness_rating30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
effective_length0.625 INCHES NOMINAL IN
special_featuresTHRU HOLE THD ON BOTH ENDS 4-40 UNC 2B 0.112 IN. MIN LG,WITH RETAINING RING IN
style_designatorGROOVE
surface_treatmentPHOSPHATE OVERALL
undercut_diameter0.1185 INCHES MINIMUM AND 0.1195 INCHES MAXIMUM IN
NSN5315-00-923-5409
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: PL2122700-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES OUTSIDE DIAMETER
•
UNDERCUT WIDTH: 0.042 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
•
FIRST END TAPER LENGTH: 0.016 INCHES NOMINAL IN
•
UNDERCUT DIAMETER: 0.1185 INCHES MINIMUM AND 0.1195 INCHES MAXIMUM IN
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
FIRST END STYLE: CHAMFERED W/THRU HOLE
•
HARDNESS RATING: 30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER
UNDERCUT WIDTH0.042 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
FIRST END TAPER LENGTH0.016 INCHES NOMINAL IN
UNDERCUT DIAMETER0.1185 INCHES MINIMUM AND 0.1195 INCHES MAXIMUM IN
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-P-16232,TY M,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
FIRST END STYLECHAMFERED W/THRU HOLE
HARDNESS RATING30.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MAXIMUM OVERALL
STYLE DESIGNATORGROOVE
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 2
5315PL0892376Reference document
Same NSN cross-reference
Reference document — Informative reference only
2122700-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PL2122700-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL2122700-4?
PL2122700-4 is a PIN,GROOVED,HEADLESS.
What parts can replace PL2122700-4?
There are 2 known substitutes for PL2122700-4: 5315PL0892376, 2122700-4. Substitute compatibility should be verified for your specific system.
What is the NSN for PL2122700-4?
PL2122700-4 is cataloged in the U.S. Government catalog under NSN 5315-00-923-5409. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL2122700-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.