PartsTable
Technical Data Sheet
Download PDF

PL202673 — BEARING,BALL,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

PL202673: BEARING,BALL,THRUST.

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1018 OVERALL, bore_diameter: 1.5520 INCHES MINIMUM AND 1.5720 INCHES MAXIMUM IN, alignment_type: RIGID, overall_height: 0.9310 INCHES MINIMUM AND 0.9450 INCHES MAXIMUM IN, surface_finish: GROUND, special_features: INSIDE SMALL BORE CORNER 0.277 IN. BY 25 DEG BEVEL,LARGE BORE RACE 2.115 IN.

MIN. TO 2.135 IN. MAX DIA.

IN. This part is cataloged in the U.S. Government catalog under NSN 3110-00-236-3695, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL202673
NSN: 3110-00-236-3695
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 07988 — AUTOMOTIVE INC FLUID POWER SYSTEMS COMPONENTS DIV SUB OF UNITED TECHNOLOGIES CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1018 OVERALL
bore_diameter1.5520 INCHES MINIMUM AND 1.5720 INCHES MAXIMUM IN
alignment_typeRIGID
overall_height0.9310 INCHES MINIMUM AND 0.9450 INCHES MAXIMUM IN
surface_finishGROUND
special_featuresINSIDE SMALL BORE CORNER 0.277 IN. BY 25 DEG BEVEL,LARGE BORE RACE 2.115 IN. MIN. TO 2.135 IN. MAX DIA. IN
style_designatorCLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
overall_outside_diameter3.3420 INCHES MINIMUM AND 3.3440 INCHES MAXIMUM IN
retainer_fabrication_methodPRESSED
material_document_and_classificationQQ-W-409 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-236-3695
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: PL202673 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: CLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-W-409 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 3.3420 INCHES MINIMUM AND 3.3440 INCHES MAXIMUM IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
OVERALL HEIGHT0.9310 INCHES MINIMUM AND 0.9450 INCHES MAXIMUM IN
SURFACE FINISHGROUND
STYLE DESIGNATORCLUTCH RELEASE, THRUST, LUBRICATED AND SEALED
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-409 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER3.3420 INCHES MINIMUM AND 3.3440 INCHES MAXIMUM IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESINSIDE SMALL BORE CORNER 0.277 IN. BY 25 DEG BEVEL,LARGE BORE RACE 2.115 IN. MIN. TO 2.135 IN. MAX DIA. IN
BORE DIAMETER1.5520 INCHES MINIMUM AND 1.5720 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
BB202850Reference document
Same NSN cross-reference
Reference document — Secondary reference
A3827Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PL202673?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL202673?
PL202673 is a BEARING,BALL,THRUST.
What parts can replace PL202673?
There are 2 known substitutes for PL202673: BB202850, A3827. Substitute compatibility should be verified for your specific system.
What is the NSN for PL202673?
PL202673 is cataloged in the U.S. Government catalog under NSN 3110-00-236-3695. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL202673

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.