PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PL13213E5820-14
PL13213E5820-14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC AND CORK OVERALL, hole_diameter: 0.139 INCHES MINIMUM AND 0.150 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.250 INCHES NOMINAL IN, overall_length: 1.250 INCHES NOMINAL IN, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-239-4930, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL13213E5820-14
NSN: 5330-00-239-4930
FSC: 5330
CAGE: 07860 — BOGUE ELECTRIC MANUFACTURING CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC AND CORK OVERALL
hole_diameter0.139 INCHES MINIMUM AND 0.150 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.250 INCHES NOMINAL IN
overall_length1.250 INCHES NOMINAL IN
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
aperture_diameter0.726 INCHES NOMINAL IN
bolt_hole_quantity4
cross-sectional_thickness0.063 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-C-6183,TY 2,CL 2,GR B MIL SPEC ALL MATERIAL RESPONSES OVERALL
outside_edge_to_bolt_hole_center_distance_along_width0.172 INCHES NOMINAL IN
NSN5330-00-239-4930
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PL13213E5820-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-C-6183,TY 2,CL 2,GR B MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 0.906 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
BOLT HOLE QUANTITY: 4
•
HOLE DIAMETER: 0.139 INCHES MINIMUM AND 0.150 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.172 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 70.0 SHORE DUROMETER A MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-C-6183,TY 2,CL 2,GR B MIL SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL WIDTH1.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH0.906 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
BOLT HOLE QUANTITY4
HOLE DIAMETER0.139 INCHES MINIMUM AND 0.150 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.172 INCHES NOMINAL IN
OVERALL LENGTH1.250 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH0.906 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
103-20082Interchangeable
interchangeable cross-reference
interchangeable
69607Interchangeable
interchangeable cross-reference
interchangeable
502-131Interchangeable
interchangeable cross-reference
interchangeable
04306-8144Interchangeable
interchangeable cross-reference
interchangeable
13213E5831-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PL13213E5820-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL13213E5820-14?
PL13213E5820-14 is a GASKET.
What parts can replace PL13213E5820-14?
There are 5 known substitutes for PL13213E5820-14: 103-20082, 69607, 502-131 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PL13213E5820-14?
PL13213E5820-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-239-4930. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL13213E5820-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026