PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PL-30451-1 ITEM 34
PL-30451-1 ITEM 34 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, body_width: 3.500 INCHES MAXIMUM IN, body_height: 2.500 INCHES MAXIMUM IN, bore_diameter: 3.5240 INCHES MINIMUM AND 3.5290 INCHES MAXIMUM IN, rating_method: WINDING TURNS SINGLE COMPONENT SINGLE WINDING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-319-8479, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL-30451-1 ITEM 34
NSN: 3110-01-319-8479
FSC: 3110
CAGE: 82974 — MUNTERS CORPORATION DBA MUNTERS DES CHAMPS PRODUCTS DIV CARGOCAIRE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
body_width3.500 INCHES MAXIMUM IN
body_height2.500 INCHES MAXIMUM IN
bore_diameter3.5240 INCHES MINIMUM AND 3.5290 INCHES MAXIMUM IN
coil_quantity9
rating_methodWINDING TURNS SINGLE COMPONENT SINGLE WINDING
turn_quantity8 SINGLE COMPONENT SINGLE WINDING
alignment_typeRIGID
coil_form_typeHOLLOW SINGLE COMPONENT
housing_length6.5005 INCHES NOMINAL IN
inclosure_typeFULLY INCLOSED
NSN3110-01-319-8479
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: PL-30451-1 ITEM 34 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
119-11Interchangeable
interchangeable cross-reference
interchangeable
17844Interchangeable
interchangeable cross-reference
interchangeable
0180-2099Interchangeable
interchangeable cross-reference
interchangeable
545-1013-003Interchangeable
interchangeable cross-reference
interchangeable
70207Interchangeable
interchangeable cross-reference
interchangeable
SM-B-528532Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PL-30451-1 ITEM 34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL-30451-1 ITEM 34?
PL-30451-1 ITEM 34 is a BEARING,BALL,ANNULAR.
What parts can replace PL-30451-1 ITEM 34?
There are 15 known substitutes for PL-30451-1 ITEM 34: 119-11, 17844, 0180-2099 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PL-30451-1 ITEM 34?
PL-30451-1 ITEM 34 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-319-8479. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL-30451-1 ITEM 34

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026