PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PL-1-3
PL-1-3 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The TIP,ELECTRIC SOLDERING IRON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, base_style: MEDIUM TWO PIN, bulb_style: T ("U" SHAPED TUBULAR), head_style: FLAT CHAMFER, head_height: 0.125 INCHES NOMINAL IN, thread_class: 2A A. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-723-5174, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PL-1-3
NSN: 5305-00-723-5174
FSC: 5305
CAGE: 29440 — W. M. BERG, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
base_styleMEDIUM TWO PIN
bulb_styleT ("U" SHAPED TUBULAR)
head_styleFLAT CHAMFER
head_height0.125 INCHES NOMINAL IN
thread_class2A A
head_diameter0.250 INCHES NOMINAL IN
thread_length0.156 INCHES MINIMUM IN
overall_length7.500 INCHES MAXIMUM IN
shoulder_shapeROUND FIRST SHOULDER
wattage_rating13.000 WATTS
bulb_designatorGX23
NSN5305-00-723-5174
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: PL-1-3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD LENGTH: 0.156 INCHES MINIMUM IN
•
SHOULDER LENGTH: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM FIRST SHOULDER IN
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD DIAMETER: 0.250 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.125 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD LENGTH0.156 INCHES MINIMUM IN
SHOULDER LENGTH0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM FIRST SHOULDER IN
THREAD DIRECTIONRIGHT-HAND
HEAD DIAMETER0.250 INCHES NOMINAL IN
FASTENER LENGTH0.281 INCHES MINIMUM AND 0.283 INCHES MAXIMUM IN
HEAD HEIGHT0.125 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SHOULDER DIAMETER0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM FIRST SHOULDER IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
9250Interchangeable
interchangeable cross-reference
interchangeable
95-105Interchangeable
interchangeable cross-reference
interchangeable
41-30Interchangeable
interchangeable cross-reference
interchangeable
149-9-1Interchangeable
interchangeable cross-reference
interchangeable
4310Interchangeable
interchangeable cross-reference
interchangeable
123-39Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PL-1-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PL-1-3?
PL-1-3 is a TIP,ELECTRIC SOLDERING IRON.
What parts can replace PL-1-3?
There are 26 known substitutes for PL-1-3: 9250, 95-105, 41-30 and 23 more. Substitute compatibility should be verified for your specific system.
Is PL-1-3 still available?
PL-1-3 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PL-1-3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026