PartsTable
Technical Data Sheet
Download PDF

PI719H — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

PI719H: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.063 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN, diameter: 0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-282-0331, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PI719H
NSN: 5315-00-282-0331
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 73830 — GERSTENLAGER CO THE (USA)
SPECIFICATIONS
height0.063 INCHES MINIMUM AND 0.094 INCHES MAXIMUM IN
diameter0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
materialSTEEL OVERALL
head_styleFLAT
chamfer_length0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
style_designatorSTRAIGHT
features_providedCASEHARDENED
pin_chamfer_angle44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
pin_head_diameter0.438 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
under_head_length1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
first_hole_diameter0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
hole_arrangement_styleONE END DRILLED
NSN5315-00-282-0331
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: PI719H · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
•
PIN CHAMFER ANGLE: 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
•
FIRST HOLE DIAMETER: 0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
•
DIAMETER: 0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH1.245 INCHES MINIMUM AND 1.255 INCHES MAXIMUM IN
PIN CHAMFER ANGLE44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
FIRST HOLE DIAMETER0.135 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.438 INCHES MINIMUM AND 0.468 INCHES MAXIMUM IN
DIAMETER0.307 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
FEATURES PROVIDEDCASEHARDENED
HEAD STYLEFLAT
SUBSTITUTES & CROSS-REFERENCES 4
P1719HReference document
Same NSN cross-reference
Reference document — Secondary reference
P1454Reference document
Same NSN cross-reference
Reference document — Secondary reference
PI454Reference document
Same NSN cross-reference
Reference document — Secondary reference
116X11RReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy PI719H?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PI719H?
PI719H is a PIN,STRAIGHT,HEADED.
What parts can replace PI719H?
There are 4 known substitutes for PI719H: P1719H, P1454, PI454 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PI719H?
PI719H is cataloged in the U.S. Government catalog under NSN 5315-00-282-0331. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PI719H

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.