PartsTable / COMPONENT / PH202
PH202
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: CORK SEALING ELEMENT, case_style: RECESSED, seal_width: 0.500 INCHES NOMINAL IN, housing_bore_diameter: 2.833 INCHES MINIMUM AND 2.835 INCHES MAXIMUM IN, sealing_element_style: VERTICAL, accommodated_shaft_diameter: 1.719 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-383-3549, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
PH202
NSN: 5330-00-383-3549 FSC: 5330 CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
material CORK SEALING ELEMENT case_style RECESSED seal_width 0.500 INCHES NOMINAL IN housing_bore_diameter 2.833 INCHES MINIMUM AND 2.835 INCHES MAXIMUM IN sealing_element_style VERTICAL accommodated_shaft_diameter 1.719 INCHES NOMINAL IN accommodated_shaft_maximum_rated_speed 1100 FEET PER MINUTE FT NSN 5330-00-383-3549
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: PH202
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SEALING ELEMENT STYLE: VERTICAL
• HOUSING BORE DIAMETER: 2.833 INCHES MINIMUM AND 2.835 INCHES MAXIMUM IN
• ACCOMMODATED SHAFT DIAMETER: 1.719 INCHES NOMINAL IN
• SEAL WIDTH: 0.500 INCHES NOMINAL IN
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 1100 FEET PER MINUTE FT
• MATERIAL: CORK SEALING ELEMENT
TECHNICAL CHARACTERISTICS (FLIS)
SEALING ELEMENT STYLE VERTICAL HOUSING BORE DIAMETER 2.833 INCHES MINIMUM AND 2.835 INCHES MAXIMUM IN ACCOMMODATED SHAFT DIAMETER 1.719 INCHES NOMINAL IN SEAL WIDTH 0.500 INCHES NOMINAL IN ACCOMMODATED SHAFT MAXIMUM RATED SPEED 1100 FEET PER MINUTE FT MATERIAL CORK SEALING ELEMENT CASE STYLE RECESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
A31106 Interchangeable interchangeable cross-reference
interchangeable
56323 Interchangeable interchangeable cross-reference
interchangeable
E511 Interchangeable interchangeable cross-reference
interchangeable
650 Interchangeable interchangeable cross-reference
interchangeable
39286 Interchangeable interchangeable cross-reference
interchangeable
291H1 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy PH202?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PH202?
PH202 is a SEAL,PLAIN ENCASED.
What parts can replace PH202?
There are 10 known substitutes for PH202: A31106, 56323, E511 and 7 more. Substitute compatibility should be verified for your specific system.
Is PH202 still available?
PH202 is currently cancelled.