PartsTable
Technical Data Sheet
Download PDF

PG1062 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PG1062: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.281 INCHES NOMINAL IN, overall_width: 0.562 INCHES NOMINAL IN, tongue_hole_type: ROUND, UNTHREADED, material_thickness: 0.050 INCHES NOMINAL IN, loop_inside_diameter: 5.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-617-8541, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PG1062
NSN: 5340-00-617-8541
FSC: 5340 — Hardware, Commercial
CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
diameter0.281 INCHES NOMINAL IN
overall_width0.562 INCHES NOMINAL IN
tongue_hole_typeROUND, UNTHREADED
material_thickness0.050 INCHES NOMINAL IN
loop_inside_diameter5.000 INCHES NOMINAL IN
NSN5340-00-617-8541
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PG1062 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.281 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
LOOP INSIDE DIAMETER: 5.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
DIAMETER0.281 INCHES NOMINAL IN
OVERALL WIDTH0.562 INCHES NOMINAL IN
MATERIAL THICKNESS0.050 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER5.000 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PG1062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PG1062?
PG1062 is a CLAMP,LOOP.
What is the NSN for PG1062?
PG1062 is cataloged in the U.S. Government catalog under NSN 5340-00-617-8541. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PG1062

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.