PartsTable
Technical Data Sheet
Download PDF

PG1050 — BRACKET,ANGLE

✓ Government record, cited
PanzerGlass · ORING SEAL
PRODUCT OVERVIEW

PG1050: BRACKET,ANGLE.

Protect your iPad from the hazards of everyday life with PanzerGlass®. Accidental bumps against sharp-edged table corners or crushing falls onto stone-hard floors are no match for this scratch and shock-resistant screen protector. The screen protector is easy to apply and once installed, you’ll never again fear the sight of your iPad tumbling to the ground.

This may never happen, but if it does, you’ll regret not having clicked “add to cart”. This part is cataloged in the U.S. Government catalog under NSN 5340-00-309-9344, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
PG1050
NSN: 5340-00-309-9344
FSC: 5340 — Hardware, Commercial
CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width0.593 INCHES NOMINAL IN
first_leg_length1.000 INCHES NOMINAL IN
second_leg_styleEND RADIUS
second_leg_width0.593 INCHES NOMINAL IN
style_designatorOFFSET ANGLE
second_leg_length0.750 INCHES NOMINAL IN
first_leg_thickness0.070 INCHES NOMINAL IN
first_leg_slot_width0.312 INCHES NOMINAL IN
second_leg_thickness0.078 INCHES NOMINAL IN
NSN5340-00-309-9344
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PG1050 MFR: PanzerGlass ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.375 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.312 INCHES NOMINAL IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG WIDTH: 0.593 INCHES NOMINAL IN
•
SECOND LEG LENGTH: 0.750 INCHES NOMINAL IN
•
SECOND LEG SLOT WIDTH: 0.312 INCHES NOMINAL IN
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE SLOT
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.375 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.312 INCHES NOMINAL IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG WIDTH0.593 INCHES NOMINAL IN
SECOND LEG LENGTH0.750 INCHES NOMINAL IN
SECOND LEG SLOT WIDTH0.312 INCHES NOMINAL IN
FIRST LEG HOLE ARRANGEMENT STYLEONE SLOT
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.296 INCHES NOMINAL IN
STYLE DESIGNATOROFFSET ANGLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PG1050?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PG1050?
PG1050 is a BRACKET,ANGLE manufactured by PanzerGlass.
What is the NSN for PG1050?
PG1050 is cataloged in the U.S. Government catalog under NSN 5340-00-309-9344. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PG1050

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.