PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PE2-6
PE2-6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The ANCHOR,GUY is a the manufacturer industrial component. Key specifications include length: 0.625 INCHES NOMINAL IN, diameter: 0.250 INCHES NOMINAL IN, style_designator: INTERNALLY THREADED FULL LENGTH, cross-sectional_shape: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-214-0059, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PE2-6
NSN: 5340-01-214-0059
FSC: 5340
CAGE: 29440 — W. M. BERG, INC. (USA)
SPECIFICATIONS
length0.625 INCHES NOMINAL IN
diameter0.250 INCHES NOMINAL IN
style_designatorINTERNALLY THREADED FULL LENGTH
cross-sectional_shapeROUND
NSN5340-01-214-0059
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PE2-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.625 INCHES NOMINAL IN
•
STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
•
CROSS-SECTIONAL SHAPE: ROUND
•
DIAMETER: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH0.625 INCHES NOMINAL IN
STYLE DESIGNATORINTERNALLY THREADED FULL LENGTH
CROSS-SECTIONAL SHAPEROUND
DIAMETER0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
3P76.25Interchangeable
interchangeable cross-reference
interchangeable
06F01Interchangeable
interchangeable cross-reference
interchangeable
I-STATInterchangeable
interchangeable cross-reference
interchangeable
064C07-0004Interchangeable
interchangeable cross-reference
interchangeable
PE26Interchangeable
interchangeable cross-reference
interchangeable
EG7Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PE2-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PE2-6?
PE2-6 is a ANCHOR,GUY.
What parts can replace PE2-6?
There are 7 known substitutes for PE2-6: 3P76.25, 06F01, I-STAT and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PE2-6?
PE2-6 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-214-0059. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PE2-6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026