PartsTable
Technical Data Sheet
Download PDF

PDP34 — COUPLING ASSEMBLY,TUBE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

PDP34: COUPLING ASSEMBLY,TUBE.

The COUPLING ASSEMBLY,TUBE is a the manufacturer industrial component. Key specifications include operating_pressure: 6000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS, end_item_identification: 2530-01-390-4683 RECOVERY VEHICLE,FULL TRACKED, part_name_assigned_by_controlling_agency: COUPLING,TEST PORT. This part is cataloged in the U.S.

Government catalog under NSN 4730-01-537-0260, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PDP34
NSN: 4730-01-537-0260
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 30780 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV TUBE FITTINGS DIVISION (USA)
SPECIFICATIONS
special_featuresSOURCE CONTROL DRAWING; MALE COUPLING HALF;-4SAE ORB; CAPABLE OF PASSING 100,000 IMPULSE CYCLES AT A RANGE OF 0 TO 133 PERCENT OF MAXIMUM OPERATING PRESSURE
operating_pressure6000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
end_item_identification2530-01-390-4683 RECOVERY VEHICLE,FULL TRACKED
part_name_assigned_by_controlling_agencyCOUPLING,TEST PORT
NSN4730-01-537-0260
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: PDP34 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPERATING PRESSURE: 6000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS
OPERATING PRESSURE6000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
SPECIAL FEATURESSOURCE CONTROL DRAWING; MALE COUPLING HALF;-4SAE ORB; CAPABLE OF PASSING 100,000 IMPULSE CYCLES AT A RANGE OF 0 TO 133 PERCENT OF MAXIMUM OPERATING PRESSURE
PART NAME ASSIGNED BY CONTROLLING AGENCYCOUPLING,TEST PORT
END ITEM IDENTIFICATION2530-01-390-4683 RECOVERY VEHICLE,FULL TRACKED
SUBSTITUTES & CROSS-REFERENCES 2
12478062Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
12478062-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PDP34?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PDP34?
PDP34 is a COUPLING ASSEMBLY,TUBE.
What parts can replace PDP34?
There are 2 known substitutes for PDP34: 12478062, 12478062-2. Substitute compatibility should be verified for your specific system.
What is the NSN for PDP34?
PDP34 is cataloged in the U.S. Government catalog under NSN 4730-01-537-0260. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PDP34