PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PDCP-8
PDCP-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: PLASTIC, drive_type: SERRATED, design_type: FRICTION, overall_diameter: 1.500 INCHES NOMINAL IN, special_features: FURNISHED W/PLUMBERS STEEL CHAIN NO. 1/0,10.000 IN.

MIN LG AND STAINLESS STEEL RING APPROPRIATELY ATTACHED IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-098-9786, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PDCP-8
NSN: 5340-01-098-9786
FSC: 5340
CAGE: 78357 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV QUICK COUPLER DIVISION (USA)
SPECIFICATIONS
materialPLASTIC
drive_typeSERRATED
design_typeFRICTION
overall_diameter1.500 INCHES NOMINAL IN
special_featuresFURNISHED W/PLUMBERS STEEL CHAIN NO. 1/0,10.000 IN. MIN LG AND STAINLESS STEEL RING APPROPRIATELY ATTACHED IN
NSN5340-01-098-9786
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PDCP-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC
•
OVERALL DIAMETER: 1.500 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
DRIVE TYPE: SERRATED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC
OVERALL DIAMETER1.500 INCHES NOMINAL IN
SPECIAL FEATURESFURNISHED W/PLUMBERS STEEL CHAIN NO. 1/0,10.000 IN. MIN LG AND STAINLESS STEEL RING APPROPRIATELY ATTACHED IN
DESIGN TYPEFRICTION
DRIVE TYPESERRATED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
457-14Interchangeable
interchangeable cross-reference
interchangeable
38363-1Interchangeable
interchangeable cross-reference
interchangeable
36885-40-LPInterchangeable
interchangeable cross-reference
interchangeable
TS10 7/32Interchangeable
interchangeable cross-reference
interchangeable
DP5893Interchangeable
Same NIIN cross-reference
interchangeable
GP525BW1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PDCP-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PDCP-8?
PDCP-8 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace PDCP-8?
There are 8 known substitutes for PDCP-8: 457-14, 38363-1, 36885-40-LP and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PDCP-8?
PDCP-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-098-9786. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PDCP-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026