PartsTable
Technical Data Sheet
Download PDF

PD44500PCBF — CLAMP,BLOCK

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PD44500PCBF: CLAMP,BLOCK.

The CLAMP,BLOCK is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.750 INCHES NOMINAL IN, overall_height: 0.750 INCHES NOMINAL IN, overall_length: 1.500 INCHES NOMINAL IN, special_features: SINGLE BLOCK WITH CENTRALLY LOCATED HEX HD BOLT, UNPLATED STEEL, 0.188INCH 16 UNC X 0.500 LG IN, mounting_facility: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-583-8796, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PD44500PCBF
NSN: 5340-01-583-8796
FSC: 5340 — Hardware, Commercial
CAGE: 1M442 — BWXT NUCLEAR OPERATIONS GROUP INC (USA)
SPECIFICATIONS
materialSTEEL
overall_width0.750 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
overall_length1.500 INCHES NOMINAL IN
special_featuresSINGLE BLOCK WITH CENTRALLY LOCATED HEX HD BOLT, UNPLATED STEEL, 0.188INCH 16 UNC X 0.500 LG IN
mounting_facilityUNTHREADED HOLE(S)
mounting_hole_diameter0.188 INCHES NOMINAL IN
mounting_hole_quantity1
end_item_identificationSTUD ELONGATION INSPECTION KIT
part_name_assigned_by_controlling_agencyBLOCK, TIGHTENING
NSN5340-01-583-8796
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PD44500PCBF MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 1
•
MOUNTING HOLE DIAMETER: 0.188 INCHES NOMINAL IN
•
MOUNTING FACILITY: UNTHREADED HOLE(S)
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY1
OVERALL HEIGHT0.750 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.188 INCHES NOMINAL IN
OVERALL LENGTH1.500 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MOUNTING FACILITYUNTHREADED HOLE(S)
SPECIAL FEATURESSINGLE BLOCK WITH CENTRALLY LOCATED HEX HD BOLT, UNPLATED STEEL, 0.188INCH 16 UNC X 0.500 LG IN
PART NAME ASSIGNED BY CONTROLLING AGENCYBLOCK, TIGHTENING
END ITEM IDENTIFICATIONSTUD ELONGATION INSPECTION KIT
MATERIALSTEEL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PD44500PCBF?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PD44500PCBF?
PD44500PCBF is a CLAMP,BLOCK.
What is the NSN for PD44500PCBF?
PD44500PCBF is cataloged in the U.S. Government catalog under NSN 5340-01-583-8796. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PD44500PCBF

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.