PartsTable
Technical Data Sheet
Download PDF

PD3261-3 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PD3261-3: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 0.688 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.438 INCHES NOMINAL IN, maximum_pressure_rating: 1500.0 POUNDS PER SQUARE INCH (PSI) LBS, cross-sectional_thickness: 0.047 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-189-8908, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PD3261-3
NSN: 5330-00-189-8908
FSC: 5330 — Packing and Gasket Materials
CAGE: 82892 — UTILITY ELECTRONIC CORP
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter0.688 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.438 INCHES NOMINAL IN
maximum_pressure_rating1500.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.047 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationASTM D2000 5BG715F2 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5330-00-189-8908
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PD3261-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.047 INCHES NOMINAL IN
•
MAXIMUM PRESSURE RATING: 1500.0 POUNDS PER SQUARE INCH (PSI) LBS
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 5BG715F2 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.688 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.438 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.047 INCHES NOMINAL IN
MAXIMUM PRESSURE RATING1500.0 POUNDS PER SQUARE INCH (PSI) LBS
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 5BG715F2 ASSN STD ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.688 INCHES NOMINAL IN
APERTURE DIAMETER0.438 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU OVERALL
SUBSTITUTES & CROSS-REFERENCES 4
SA213Reference document
Same NSN cross-reference
Reference document — Secondary reference
HP8001Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
5330001898908Reference document
Same NSN cross-reference
Reference document — Informative reference only
SCD12520-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PD3261-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PD3261-3?
PD3261-3 is a GASKET.
What parts can replace PD3261-3?
There are 4 known substitutes for PD3261-3: SA213, HP8001, 5330001898908 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PD3261-3?
PD3261-3 is cataloged in the U.S. Government catalog under NSN 5330-00-189-8908. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PD3261-3