PartsTable
Technical Data Sheet
Download PDF

PD140 — PLUG,PROTECTIVE,DUST AND MOISTUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PD140: PLUG,PROTECTIVE,DUST AND MOISTUR.

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: PLASTIC, drive_type: RAISED RIB, design_type: THREADED, overall_width: 3.150 INCHES NOMINAL IN, overall_height: 2.170 INCHES NOMINAL IN, overall_length: 13.390 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-521-9591, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PD140
NSN: 5340-00-521-9591
NIINs: 005219591, 015531624
FSC: 5340 — Hardware, Commercial
CAGE: 99017 — CAPLUGS LLC DBA MOKON DIV CAPLUGS (USA)
SPECIFICATIONS
materialPLASTIC
drive_typeRAISED RIB
design_typeTHREADED
overall_width3.150 INCHES NOMINAL IN
overall_height2.170 INCHES NOMINAL IN
overall_length13.390 INCHES NOMINAL IN
overall_diameter1.400 INCHES NOMINAL IN
features_providedBEVELED SEAT AND SHOULDER
thread_pitch_diameters+1.2421 TO 1.2477 INCHES IN
end_item_identification1367-01-526-5453, CAPABILITIES SET, NON-LETHAL
voltage_in_volts_and_current_type9.0 DC
thread_size_and_series/type_designator1.188-12 UNS
NSN5340-00-521-9591
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PD140 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: THREADED
•
OVERALL DIAMETER: 1.400 INCHES NOMINAL IN
•
DRIVE TYPE: RAISED RIB
•
THREAD PITCH DIAMETERS: +1.2421 TO 1.2477 INCHES IN
•
FEATURES PROVIDED: BEVELED SEAT AND SHOULDER
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1.188-12 UNS
TECHNICAL CHARACTERISTICS
DESIGN TYPETHREADED
OVERALL DIAMETER1.400 INCHES NOMINAL IN
DRIVE TYPERAISED RIB
THREAD PITCH DIAMETERS+1.2421 TO 1.2477 INCHES IN
FEATURES PROVIDEDBEVELED SEAT AND SHOULDER
MATERIALPLASTIC, POLYETHYLENE (PP)
THREAD SIZE AND SERIES/TYPE DESIGNATOR1.188-12 UNS
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PD140?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PD140?
PD140 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What is the NSN for PD140?
PD140 is cataloged in the U.S. Government catalog under NSN 5340-00-521-9591. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PD140