PartsTable
Technical Data Sheet
Download PDF

PD12C-41039-02 — WINCH,DRUM,POWER OPERATED

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

PD12C-41039-02: WINCH,DRUM,POWER OPERATED.

The WINCH,DRUM,POWER OPERATED is a the manufacturer industrial component. Key specifications include cooling_method: AIR TO AIR COOLED, operation_method: POWERED, prime_mover_type: HYDRAULIC MOTOR, unable_to_decode: UNABLE TO DECODE, operating_pressure: 11000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL POWER DRIVE LBS, drum_surface_design: PLAIN. This part is cataloged in the U.S.

Government catalog under NSN 3950-01-337-0991, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PD12C-41039-02
NSN: 3950-01-337-0991
FSC: 3950 — Winches, Hoists, Cranes, and Derricks
CAGE: 08302 — PACCAR WINCH INC DBA PACCAR WINCH DIVISION (USA)
SPECIFICATIONS
cooling_methodAIR TO AIR COOLED
operation_methodPOWERED
prime_mover_typeHYDRAULIC MOTOR
special_featuresCAPACITY RATING AT 12000 LBS; SERIES C HAS LINE SPEED INCREASE OF 4-1/2 PERCENT AND LINE PULL INCREASE OF SIX PERCENT OVER THE B-SERIES LBS
unable_to_decodeUNABLE TO DECODE
operating_pressure11000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL POWER DRIVE LBS
drum_surface_designPLAIN
drum_flange_diameter16.375 INCHES NOMINAL FIRST DRUM IN
prime_mover_quantity1
drum_diameter_and_location9.750 INCHES NOMINAL FIRST DRUM IN
NSN3950-01-337-0991
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available WINCH,DRUM,POWER OPERATED TITLE COMPONENT PN PD12C-41039-02 MFR WINCH,DRUM,POWER OPERA
KEY FEATURES
•
DRUM SURFACE DESIGN: PLAIN
•
COOLING METHOD: AIR TO AIR COOLED
•
PRIME MOVER QUANTITY: 1
•
OPERATING PRESSURE: 11000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL POWER DRIVE LBS
•
DRUM FLANGE DIAMETER: 16.375 INCHES NOMINAL FIRST DRUM IN
•
UNABLE TO DECODE: UNABLE TO DECODE
•
PRIME MOVER TYPE: HYDRAULIC MOTOR
TECHNICAL CHARACTERISTICS
DRUM SURFACE DESIGNPLAIN
COOLING METHODAIR TO AIR COOLED
PRIME MOVER QUANTITY1
OPERATING PRESSURE11000.0 POUNDS PER SQUARE INCH (PSI) NOMINAL POWER DRIVE LBS
DRUM FLANGE DIAMETER16.375 INCHES NOMINAL FIRST DRUM IN
UNABLE TO DECODEUNABLE TO DECODE
SPECIAL FEATURESCAPACITY RATING AT 12000 LBS; SERIES C HAS LINE SPEED INCREASE OF 4-1/2 PERCENT AND LINE PULL INCREASE OF SIX PERCENT OVER THE B-SERIES LBS
PRIME MOVER TYPEHYDRAULIC MOTOR
OPERATION METHODPOWERED
DRUM DIAMETER AND LOCATION9.750 INCHES NOMINAL FIRST DRUM IN
SUBSTITUTES & CROSS-REFERENCES 2
227309Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PD12B-36045-02Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy PD12C-41039-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PD12C-41039-02?
PD12C-41039-02 is a WINCH,DRUM,POWER OPERATED.
What parts can replace PD12C-41039-02?
There are 2 known substitutes for PD12C-41039-02: 227309, PD12B-36045-02. Substitute compatibility should be verified for your specific system.
What is the NSN for PD12C-41039-02?
PD12C-41039-02 is cataloged in the U.S. Government catalog under NSN 3950-01-337-0991. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PD12C-41039-02