PartsTable
Technical Data Sheet
Download PDF

PD11-5 — COUPLING HALF,QUICK DISCONNECT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

PD11-5: COUPLING HALF,QUICK DISCONNECT.

The COUPLING HALF,QUICK DISCONNECT is a the manufacturer industrial component. Key specifications include material: STEEL BODY, nut_style: HEXAGON, nut_height: 0.125 INCHES NOMINAL IN, thread_class: 3B, thread_series: UNF, overall_length: 2.938 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-637-1058, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PD11-5
NSN: 5310-00-637-1058
NIINs: 006371058, 008525440
FSC: 5310 — Nuts and Washers
CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
materialSTEEL BODY
nut_styleHEXAGON
nut_height0.125 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
overall_length2.938 INCHES NOMINAL IN
connection_typeTHREADED EXTERNAL HOSE GRIPPING FIRST FLUID END CONNECTION
furnished_itemsHOSE COUPLING NUT
connection_styleHOSE GRIPPING NIPPLE ALL ENDS
style_designatorMALE COUPLING HALF
thread_directionRIGHT-HAND
width_across_flats0.375 INCHES NOMINAL IN
NSN5310-00-637-1058
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: PD11-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT HEIGHT: 0.125 INCHES NOMINAL IN
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 3B
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT HEIGHT0.125 INCHES NOMINAL IN
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH32
MATERIALSTEEL OVERALL
BEARING SURFACE TYPEFLAT
SUBSTITUTES & CROSS-REFERENCES 2
56088Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4B2049Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PD11-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PD11-5?
PD11-5 is a COUPLING HALF,QUICK DISCONNECT.
What parts can replace PD11-5?
There are 2 known substitutes for PD11-5: 56088, 4B2049. Substitute compatibility should be verified for your specific system.
What is the NSN for PD11-5?
PD11-5 is cataloged in the U.S. Government catalog under NSN 5310-00-637-1058. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PD11-5