PartsTable
Technical Data Sheet
PD-200 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: ALUMINUM OR PLASTIC OR STEEL, wire_loop: NOT INCLUDED, drive_type: SERRATED, design_type: THREADED, physical_form: LIQUID, overall_diameter: 2.625 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-634-6862, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PD-200
NSN: 5340-00-634-6862
FSC: 5340
CAGE: 99017 — CAPLUGS LLC DBA MOKON DIV CAPLUGS (USA)
SPECIFICATIONS
materialALUMINUM OR PLASTIC OR STEEL
wire_loopNOT INCLUDED
drive_typeSERRATED
design_typeTHREADED
physical_formLIQUID
overall_diameter2.625 INCHES MAXIMUM IN
special_featuresGENERAL PURPOSE AEROSOL AIR FRESHENER, COUNTERACTS TYPICAL OFFENSIVE ODORS; BOX CONTAINS 12, 14 OUNCE AEROSOL CANS OZ
active_ingredientANY ACCEPTABLE
dispersing_methodPRESSURIZED DISPENSER SPRAY
features_providedBEVELED SEAT AND SHOULDER
surface_treatmentANODIZE OR ZINC
environmental_attribute_codeLOW VOLATILE ORGANIC COMPOUND - HOUSEHOLD CONSUMER PRODUCTS
NSN5340-00-634-6862
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PD-200 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: ALUMINUM OR PLASTIC OR STEEL
DRIVE TYPE: SERRATED
FEATURES PROVIDED: BEVELED SEAT AND SHOULDER
OVERALL DIAMETER: 2.625 INCHES MAXIMUM IN
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 1-5/8-12 UN
DESIGN TYPE: THREADED
SURFACE TREATMENT: ANODIZE OR ZINC
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALALUMINUM OR PLASTIC OR STEEL
DRIVE TYPESERRATED
FEATURES PROVIDEDBEVELED SEAT AND SHOULDER
OVERALL DIAMETER2.625 INCHES MAXIMUM IN
THREAD SIZE AND SERIES/TYPE DESIGNATOR1-5/8-12 UN
DESIGN TYPETHREADED
SURFACE TREATMENTANODIZE OR ZINC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
GSA DEODORANT GENERAL PURPOSE (-Interchangeable
interchangeable cross-reference
interchangeable
DEODORANT,GENERAL PURPOSEInterchangeable
interchangeable cross-reference
interchangeable
752C800,DEODORANT,GENERAL PURPO-Interchangeable
interchangeable cross-reference
interchangeable
3-20Interchangeable
Same NIIN cross-reference
interchangeable
5340PL1857745Interchangeable
Same NIIN cross-reference
interchangeable
P4021572-05Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PD-200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PD-200?
PD-200 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace PD-200?
There are 6 known substitutes for PD-200: GSA DEODORANT GENERAL PURPOSE (-, DEODORANT,GENERAL PURPOSE, 752C800,DEODORANT,GENERAL PURPO- and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for PD-200?
PD-200 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-634-6862. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PD-200