PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PC456000001-5
PC456000001-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: ALUMINUM ALLOY, design_type: FRICTION, overall_diameter: 0.313 INCHES NOMINAL IN, surface_treatment: ANODIZE, inside_diameter_length: 0.844 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-584-9748, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PC456000001-5
NSN: 5340-00-584-9748
FSC: 5340
CAGE: 38597 — LOCKHEED MARTIN CORPORATION DIV ROTARY AND MISSION SYSTEMS (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
design_typeFRICTION
overall_diameter0.313 INCHES NOMINAL IN
surface_treatmentANODIZE
inside_diameter_length0.844 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
tube_outside_diameter_for_which_designed0.250 INCHES NOMINAL IN
NSN5340-00-584-9748
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PC456000001-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ANODIZE
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.250 INCHES NOMINAL IN
•
INSIDE DIAMETER LENGTH: 0.844 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
OVERALL DIAMETER: 0.313 INCHES NOMINAL IN
•
DESIGN TYPE: FRICTION
•
MATERIAL: ALUMINUM ALLOY
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTANODIZE
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.250 INCHES NOMINAL IN
INSIDE DIAMETER LENGTH0.844 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OVERALL DIAMETER0.313 INCHES NOMINAL IN
DESIGN TYPEFRICTION
MATERIALALUMINUM ALLOY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
60-044Interchangeable
interchangeable cross-reference
interchangeable
150374Interchangeable
interchangeable cross-reference
interchangeable
24C55203Interchangeable
interchangeable cross-reference
interchangeable
41305Interchangeable
interchangeable cross-reference
interchangeable
5982Interchangeable
interchangeable cross-reference
interchangeable
2200-2010-400Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PC456000001-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PC456000001-5?
PC456000001-5 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace PC456000001-5?
There are 11 known substitutes for PC456000001-5: 60-044, 150374, 24C55203 and 8 more. Substitute compatibility should be verified for your specific system.
Is PC456000001-5 still available?
PC456000001-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PC456000001-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026