PartsTable
Technical Data Sheet
Download PDF

PBF1265-3D10 — BOLT,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

PBF1265-3D10: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, head_style: SPLINE DRIVE SHEAR HEAD, grip_length: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, head_height: 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-133-2192, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PBF1265-3D10
NSN: 5306-01-133-2192
FSC: 5306 — Bolts
CAGE: 27624 — SPS TECHNOLOGIES LLC DBA PB FASTENERS DIV PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
head_styleSPLINE DRIVE SHEAR HEAD
grip_length0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
head_height0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM IN
thread_length0.256 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
fastener_length0.891 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_between_flats0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM IN
nominal_thread_diameter0.190 INCHES IN
NSN5306-01-133-2192
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: PBF1265-3D10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.891 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.256 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: SPLINE DRIVE SHEAR HEAD
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM IN
FASTENER LENGTH0.891 INCHES MINIMUM AND 0.911 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.256 INCHES MINIMUM AND 0.296 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLESPLINE DRIVE SHEAR HEAD
THREAD DIRECTIONRIGHT-HAND
GRIP LENGTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5306 — Bolts
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017
SUBSTITUTES & CROSS-REFERENCES 3
S406-3D10Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
ST3M744-3D10Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
MB154-3D10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy PBF1265-3D10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PBF1265-3D10?
PBF1265-3D10 is a BOLT,CLOSE TOLERANCE.
What parts can replace PBF1265-3D10?
There are 3 known substitutes for PBF1265-3D10: S406-3D10, ST3M744-3D10, MB154-3D10. Substitute compatibility should be verified for your specific system.
What is the NSN for PBF1265-3D10?
PBF1265-3D10 is cataloged in the U.S. Government catalog under NSN 5306-01-133-2192. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PBF1265-3D10

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.