PBF1264-4-3 — BOLT,MACHINE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

PBF1264-4-3: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY OVERALL, head_style: HEXAGON, grip_length: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN, head_height: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-199-4332, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PBF1264-4-3

NSN: 5306-01-199-4332
FSC: 5306 — Bolts
CAGE: 27624 — SPS TECHNOLOGIES LLC DBA PB FASTENERS DIV PB FASTENERS (USA)

SPECIFICATIONS

material	TITANIUM ALLOY OVERALL
head_style	HEXAGON
grip_length	0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
head_height	0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
thread_class	3A A
thread_length	0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
surface_finish	63.0 MICROINCHES GRIP
fastener_length	0.598 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
thread_direction	RIGHT-HAND
features_provided	FINISHED HEAD
surface_treatment	ALUMINUM AND CHROMATE OVERALL
width_between_flats	0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
NSN	5306-01-199-4332

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 63.0 MICROINCHES GRIP

•

HEAD HEIGHT: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN

•

FASTENER LENGTH: 0.598 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-83488,TYPE 2,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS4967,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V

TECHNICAL CHARACTERISTICS

SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	63.0 MICROINCHES THREADS
HEAD HEIGHT	0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
FASTENER LENGTH	0.598 INCHES MINIMUM AND 0.628 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-83488,TYPE 2,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH	0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS4967,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE OVERALL V
NOMINAL THREAD DIAMETER	0.250 INCHES IN
FEATURES PROVIDED	FINISHED HEAD

SUBSTITUTES & CROSS-REFERENCES 5

VS3207-4-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

801651-4-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

MB251-4-3Reference document

Same NSN cross-reference

Reference document — Secondary reference

SC2663-4-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

ST3M7Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy PBF1264-4-3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PBF1264-4-3?

PBF1264-4-3 is a BOLT,MACHINE.

What parts can replace PBF1264-4-3?

There are 5 known substitutes for PBF1264-4-3: VS3207-4-3, 801651-4-3, MB251-4-3 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for PBF1264-4-3?

PBF1264-4-3 is cataloged in the U.S. Government catalog under NSN 5306-01-199-4332. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PBF1264-4-3 — BOLT,MACHINE

Request a Quote — PBF1264-4-3