PartsTable
Technical Data Sheet
Download PDF

PB2096 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

PB2096: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 0.938 INCHES NOMINAL IN, length: 1.000 INCHES NOMINAL IN, material: STEEL OVERALL, loop_width: 0.312 INCHES NOMINAL IN, hole_diameter: 0.097 INCHES NOMINAL IN, smallest_width: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-355-9874, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PB2096
NSN: 5340-00-355-9874
FSC: 5340 — Hardware, Commercial
CAGE: 3B150 — RAYTHEON COMPANY DBA RAYTHEON CO (USA)
SPECIFICATIONS
width0.938 INCHES NOMINAL IN
length1.000 INCHES NOMINAL IN
materialSTEEL OVERALL
loop_width0.312 INCHES NOMINAL IN
hole_diameter0.097 INCHES NOMINAL IN
smallest_width0.375 INCHES NOMINAL IN
material_thickness0.010 INCHES NOMINAL IN
NSN5340-00-355-9874
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PB2096 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.000 INCHES NOMINAL IN
•
LOOP WIDTH: 0.312 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
SMALLEST WIDTH: 0.375 INCHES NOMINAL IN
•
WIDTH: 0.938 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.097 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LENGTH1.000 INCHES NOMINAL IN
LOOP WIDTH0.312 INCHES NOMINAL IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
SMALLEST WIDTH0.375 INCHES NOMINAL IN
WIDTH0.938 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.097 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
SCB76435Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy PB2096?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PB2096?
PB2096 is a CLIP,SPRING TENSION.
What parts can replace PB2096?
There is 1 known substitute for PB2096: SCB76435. Substitute compatibility should be verified for your specific system.
What is the NSN for PB2096?
PB2096 is cataloged in the U.S. Government catalog under NSN 5340-00-355-9874. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PB2096