PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PART NUMBER SHOULD BE 296-4
PART NUMBER SHOULD BE 296-4 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE,NONMETALLIC is a the manufacturer industrial component. Key specifications include body_length: 0.450 INCHES MAXIMUM IN, rating_method: ELECTRICAL SINGLE COMPONENT SINGLE WINDING, inclosure_type: FULLY INCLOSED, mounting_method: TERMINAL SINGLE GROUP, frequency_rating: 2.5 HERTZ NOMINAL SINGLE COMPONENT, special_features: NO. 2 PRI DC BUS CIRCUIT BREAKER.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-401-8231, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PART NUMBER SHOULD BE 296-4
NSN: 4720-00-401-8231
FSC: 4720
CAGE: 98441 — PARKER HANNIFIN CORP DBA PNEUTRONICS DIV STRATOFLEX PRODUCTS DIVISION (USA)
SPECIFICATIONS
body_length0.450 INCHES MAXIMUM IN
rating_methodELECTRICAL SINGLE COMPONENT SINGLE WINDING
inclosure_typeFULLY INCLOSED
panel_quantity1
mounting_methodTERMINAL SINGLE GROUP
frequency_rating2.5 HERTZ NOMINAL SINGLE COMPONENT
special_featuresNO. 2 PRI DC BUS CIRCUIT BREAKER
winding_quantity1 SINGLE COMPONENT
features_providedTINNED WIRE LEADS
inductance_rating10.70 MICROHENRIES MINIMUM AND 18.10 MICROHENRIES MAXIMUM SINGLE COMPONENT SINGLE WINDING
body_outside_diameter3.810 INCHES MAXIMUM IN
reliability_indicatorNOT ESTABLISHED
NSN4720-00-401-8231
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: PART NUMBER SHOULD BE 296-4 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
42804Interchangeable
interchangeable cross-reference
interchangeable
40398Interchangeable
interchangeable cross-reference
interchangeable
2901806-1Interchangeable
interchangeable cross-reference
interchangeable
42804-1Interchangeable
interchangeable cross-reference
interchangeable
210-4Interchangeable
Same NIIN cross-reference
interchangeable
1501-4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy PART NUMBER SHOULD BE 296-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PART NUMBER SHOULD BE 296-4?
PART NUMBER SHOULD BE 296-4 is a HOSE,NONMETALLIC.
What parts can replace PART NUMBER SHOULD BE 296-4?
There are 6 known substitutes for PART NUMBER SHOULD BE 296-4: 42804, 40398, 2901806-1 and 3 more. Substitute compatibility should be verified for your specific system.
Is PART NUMBER SHOULD BE 296-4 still available?
PART NUMBER SHOULD BE 296-4 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PART NUMBER SHOULD BE 296-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026