PartsTable / COMPONENT / PAF20-6-6
PAF20-6-6
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SHIELD,EXPANSION is a the manufacturer industrial component. Key specifications include material: STEEL, overall_length: 0.835 INCHES NOMINAL IN, thread_provision: THREADED, features_provided: CLOSED END, surface_treatment: CADMIUM, hole_accommodation_diameter: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-759-6193, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
PAF20-6-6
NSN: 5340-00-759-6193 FSC: 5340 CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
material STEEL unit_quantity 1 overall_length 0.835 INCHES NOMINAL IN thread_provision THREADED features_provided CLOSED END surface_treatment CADMIUM hole_accommodation_diameter 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN insert_type_for_which_designed BOLT material_document_and_classification AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE surface_treatment_document_and_classification QQ-P-416, TYPE 1, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE NSN 5340-00-759-6193
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: PAF20-6-6
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE 1, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE
• MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
• INSERT TYPE FOR WHICH DESIGNED: BOLT
• SURFACE TREATMENT: CADMIUM
• HOLE ACCOMMODATION DIAMETER: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN
• FEATURES PROVIDED: CLOSED END
• THREAD PROVISION: THREADED
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION QQ-P-416, TYPE 1, CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE UNIT QUANTITY 1 MATERIAL DOCUMENT AND CLASSIFICATION AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE INSERT TYPE FOR WHICH DESIGNED BOLT SURFACE TREATMENT CADMIUM HOLE ACCOMMODATION DIAMETER 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM IN FEATURES PROVIDED CLOSED END THREAD PROVISION THREADED MATERIAL STEEL OVERALL LENGTH 0.835 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
192066 Interchangeable interchangeable cross-reference
interchangeable
00200 Interchangeable interchangeable cross-reference
interchangeable
C392-6-6 Interchangeable Same NIIN cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy PAF20-6-6?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PAF20-6-6?
PAF20-6-6 is a SHIELD,EXPANSION.
What parts can replace PAF20-6-6?
There are 3 known substitutes for PAF20-6-6: 192066, 00200, C392-6-6. Substitute compatibility should be verified for your specific system.
Is PAF20-6-6 still available?
PAF20-6-6 is currently cancelled.
Request a Quote — PAF20-6-6