PartsTable
Technical Data Sheet
PartsTable / COMPONENT / PA5002
PA5002 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FILTER ELEMENT,FLUID is a the manufacturer industrial component. Key specifications include width: 0.656 INCHES NOMINAL IN, material: STEEL OVERALL, overall_height: 0.156 INCHES NOMINAL IN, special_features: 0.156 IN. W SLOT INCLUDED IN, surface_treatment: CADMIUM OVERALL, material_thickness: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-193-2924, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
PA5002
NSN: 5340-01-193-2924
FSC: 5340
CAGE: 90915 — OTTAWA TRUCK INC DIV CARGOTEC SOLUTIONS LLC - KALMAR AMERICAS REGION (USA)
SPECIFICATIONS
width0.656 INCHES NOMINAL IN
materialSTEEL OVERALL
overall_height0.156 INCHES NOMINAL IN
special_features0.156 IN. W SLOT INCLUDED IN
surface_treatmentCADMIUM OVERALL
material_thickness0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
loop/holding_dimension0.188 INCHES NOMINAL IN
NSN5340-01-193-2924
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: PA5002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
•
LOOP/HOLDING DIMENSION: 0.188 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
WIDTH: 0.656 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN
LOOP/HOLDING DIMENSION0.188 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
OVERALL HEIGHT0.156 INCHES NOMINAL IN
SPECIAL FEATURES0.156 IN. W SLOT INCLUDED IN
WIDTH0.656 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
6588Interchangeable
interchangeable cross-reference
interchangeable
F64318Interchangeable
interchangeable cross-reference
interchangeable
4330PL1320351Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy PA5002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is PA5002?
PA5002 is a FILTER ELEMENT,FLUID.
What parts can replace PA5002?
There are 3 known substitutes for PA5002: 6588, F64318, 4330PL1320351. Substitute compatibility should be verified for your specific system.
What is the NSN for PA5002?
PA5002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-193-2924. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — PA5002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026