PA4140 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

PA4140: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, overall_width: 1.500 INCHES NOMINAL IN, heat_treatment: T-6511 SOLUTION HEAT TREATED, overall_height: 0.750 INCHES NOMINAL IN, first_tip_style: RIGHT QUARTER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-618-5460, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PA4140

NSN: 9540-00-618-5460
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: D9304 — JUNG, KARL GMBHFLACH- UND PROFILSCHLEIFMASCHINEN (DEU)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7075
overall_width	1.500 INCHES NOMINAL IN
heat_treatment	T-6511 SOLUTION HEAT TREATED
overall_height	0.750 INCHES NOMINAL IN
first_tip_style	RIGHT QUARTER RADIUS
first_tip_radius	0.062 INCHES NOMINAL IN
second_tip_style	UPPER RADIUS
basic_shape_style	ANGLE
left_inside_angle	90.0 DEGREES NOMINAL
second_tip_radius	0.062 INCHES NOMINAL IN
fabrication_method	EXTRUDED
NSN	9540-00-618-5460

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

BASE FLANGE THICKNESS: 0.125 INCHES NOMINAL IN

•

HEAT TREATMENT: T-6511 SOLUTION HEAT TREATED

•

FIRST TIP RADIUS: 0.062 INCHES NOMINAL IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

•

LEFT SIDE FLANGE THICKNESS: 0.125 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.750 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
BASE FLANGE THICKNESS	0.125 INCHES NOMINAL IN
HEAT TREATMENT	T-6511 SOLUTION HEAT TREATED
FIRST TIP RADIUS	0.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH	1.500 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS	0.125 INCHES NOMINAL IN
SECOND TIP RADIUS	0.062 INCHES NOMINAL IN
BASIC SHAPE STYLE	ANGLE

SUBSTITUTES & CROSS-REFERENCES 8

LS3207-2Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

ASTM B221Reference document

Same NSN cross-reference

Reference document — Secondary reference

2086Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

60-3095Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

13357Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy PA4140?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PA4140?

PA4140 is a SUPPORT,STRUCTURAL COMPONENT,AIR.

What parts can replace PA4140?

There are 8 known substitutes for PA4140: LS3207-2, ASTM B221, 2086 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for PA4140?

PA4140 is cataloged in the U.S. Government catalog under NSN 9540-00-618-5460. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PA4140 — SUPPORT,STRUCTURAL COMPONENT,AIR

Request a Quote — PA4140