PA28566 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

PA28566: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, overall_width: 2.400 INCHES NOMINAL IN, heat_treatment: T-6 SOLUTION HEAT TREATED, overall_height: 1.820 INCHES NOMINAL IN, first_tip_style: SQUARE END. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-179-9618, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

PA28566

NSN: 9540-00-179-9618
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 06012 — TRANSTAR METALS CORP (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7075
overall_width	2.400 INCHES NOMINAL IN
heat_treatment	T-6 SOLUTION HEAT TREATED
overall_height	1.820 INCHES NOMINAL IN
first_tip_style	SQUARE END
basic_shape_style	ANGLE
left_inside_angle	90.0 DEGREES NOMINAL
fabrication_method	EXTRUDED
base_flange_thickness	0.060 INCHES NOMINAL IN
weight_per_unit_measure	0.394 POUNDS PER LINEAR FOOT LBS
left_side_flange_thickness	0.100 INCHES NOMINAL IN
NSN	9540-00-179-9618

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

BASE FLANGE THICKNESS: 0.060 INCHES NOMINAL IN

•

HEAT TREATMENT: T-6 SOLUTION HEAT TREATED

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

•

LEFT SIDE FLANGE THICKNESS: 0.100 INCHES NOMINAL IN

•

BASIC SHAPE STYLE: ANGLE

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	1.820 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
BASE FLANGE THICKNESS	0.060 INCHES NOMINAL IN
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH	2.400 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS	0.100 INCHES NOMINAL IN
BASIC SHAPE STYLE	ANGLE
WEIGHT PER UNIT MEASURE	0.394 POUNDS PER LINEAR FOOT LBS
FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE	0.190 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 5

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

27721Reference document

Same NSN cross-reference

Reference document — Secondary reference

QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

ASTM B221Reference document

Same NSN cross-reference

Reference document — Secondary reference

LS5552Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required

Ready to buy PA28566?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is PA28566?

PA28566 is a SUPPORT,STRUCTURAL COMPONENT,AIR.

What parts can replace PA28566?

There are 5 known substitutes for PA28566: AMS-QQ-A-200/11, 27721, QQ-A-200/11 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for PA28566?

PA28566 is cataloged in the U.S. Government catalog under NSN 9540-00-179-9618. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

PA28566 — SUPPORT,STRUCTURAL COMPONENT,AIR

Request a Quote — PA28566